INTRODUCTION
The dehumidifier is fitted with an electronic logic system which controls operation and optimises consumption and performance.
The keys and information on the control panel have the following meanings
1) Start / Stand-by key
2) Operating mode selection key
3) Desired humidity / increment key (selection range from 30 to 90%).
4) Desired humidity / decrement key (selection range from 30 to 90%).
5) Detected ambient humidity / temperature warning key
6) Temperature indication
7) Humidity indication
8) Operating mode indications
9) Condensate collection tank full or tank shortage (LED ON),
Continuous discharge function enabled (LED BLINKING with frequency 1.25Hz).
Tank empty/present with continuous discharge disabled (LED OFF).
SELECTING FUNCTIONS
Stand-by. Key (1)
This key activates the dehumidifier or puts it in Stand-by mode. In the latter case, the display shows ' - - - - ' and the dehumidifier is
deactivated.
Mode. Key (2)
Pressing this button the following operating modes can be set:
• DEHUMIDIFICATION, indicated by the "drop" symbol light on the display.
• DRYING
,
indicated by the "T-Shirt" + “HI” symbols light on the display.
OPERATION WITH CONTINUOUS DISCHARGE
To operate the dehumidifier with continuous discharge, carry out the following operations:
• Take the tank out of the appliance.
• Connect the rubber pipe provided in the outfit to the condensate collection tank (at the top of the tank compartment).
• Secure the pipe with the metal clamp provided.
• Simultaneously press the increment (3) and decrement (4) keys for three seconds, with the machine in function
The activation of this function is indicated by the flashing "tank" symbol (9).
The continuous discharge function is cancelled if the empty tank is refitted.
