Olimpus FLUOVIEW FV500 User Manual Download

Page: 366 / 470

APPLIED OPERATIONS

/Changing the Chart Display Method

2-256

Page

[Labels] sub-panel

Used to set the label of the coordinate axis.

[Ticks] sub-panel

Used to set the coordinate axis line.

Enables or disables the label
display.

Enables or disables the
label display on a point
of crossing with another
axis.

Not used with the present
application.

Enables or disables the
scale display according to
the maximum and minimum
values in the chart.

Sets the label character
font.
Sets the distance from
the title to the label
display position.

Sets the distance between
labels.

Sets the angle of label
display.

Sets the label display
format.

Sets the label type.
Select [Auto] or [None].

Sets the type, color
and width of the line
along the label.

Sets the length of the
scale line from the
coordinate axis to the
label.

Enables or disables
the display of scale
line in the positions
where labels are
displayed.

Sets the type, color and
width of the scale line on the
chart side of the coordinate
axis.

Sets the length of the scale
line from the coordinate axis
to the chart side.

Sets the number of
division between
labels.

Sets the type, color and
width of the coordinate axis.

Sets the type, color and
width of the scale line on the
label side of the coordinate
axis.

Sets the type, color and
width of the scale line
between labels.

Sets the length from the
coordinate axis of the scale
line between labels to that on
the label side.

Enables or disables
the display of
coordinate axis scales
in the intermediate
position between
labels.

Summary of Contents for FLUOVIEW FV500























































































































































































































































































































































































































































































Search results

Summary of Contents for FLUOVIEW FV500

Reviews:

Related manuals for FLUOVIEW FV500

Brands by name

Popular brands

Olimpus FLUOVIEW FV500, User Manual

Search results

Summary of Contents for FLUOVIEW FV500

Reviews:

Related manuals for FLUOVIEW FV500

Brands by name

Popular brands