TABLE OF CONTENTS
2
Olin_Portable_DVD_Player_PD-9910_User_Manual_V1
SAFETY PRECAUTION
TABLE OF CONTENTS
PACKAGE CONTENTS/MAIN FEATURES
ABOUT OPTICAL DISCS
MAIN UNIT
SYSTEM CONNECTION
THE REMOTE CONTROL
BASIC OPERATION
PLAYING JPEG FILE
SYSTEM SETUP
SPECIFICATION
BATTERY
Package contents
Main Features
Disc Requirements
Disc Care and Maintenance
Powering and installation
Connecting to the slave screen
The Use of Remote Control
Fast forward and fast backward
Repeat playing
Repeat playing of favorite scene
Angle
Zoom In/ Out
Playing JPEG file
Playing MP3 files
General Setup Page
Audio Setup page
Video Setup Page
Preference Page
Rechargeable Battery Use
Precautions related to Battery Recharge
Using and Maintaining Rechargeable Battery
TROUBLESHOOTING
1
2
4
4
4
5
5
5
6
8
8
9
11
12
13
14
14
15
15
15
16
16
16
17
17
18
19
19
21
22
22
22
22
24
10
MOUNTING BAG
23
7
SLAVE SCREEN
Audio and video signal output
WARRANTY STATEMENT
26
3
QUICK INSTALLATION GUIDE
Designed to make the device setup procedure easier:
STEP 1
Remove the Main Unit, Monitor and all accessories of the player from packaging.
Pull the tab from the remote control to activate it.
STEP 2
For clear viewing on display panel or to remove the air bubble, users may lift the
clear protection shield off the screen.
STEP 3
Find the DC/AV cable (two ends are identical) from the accessories, plug one end
into DC OUT and AV OUT socket in Main Unit, plug the other end into the DC IN 9-
12V and AV IN socket in Monitor
STEP 4
Plug one end of the power adaptor/car adaptor into the portable DVD Main Unit's
DC IN 9-12V socket, and plug the other end into the power socket/12VDC Car
Cigarette Lighter Socket if you use in car.
STEP 5
Make sure power switch is set to OFF and the battery will start to charge while battery
recharge indicator light turns red. The indicator light will turn Blue if the unit is fully charged.
STEP 6
Activate the power by turning the power switch of both Main Unit and LCD Monitor to
ON, made sure the OLIN welcome screen display on Main Unit and Monitor.
STEP 7
Slide the latch on the top left side of the Main Unit to open the disc cover and insert
a DVD disc into the drive.
STEP 8
You can see the unit is loading DVD and you are ready to watch. More instructions
are in user manual.
STEP 9
To access contents from USB device or SD card, just simply plug in USB device or SD
card, if no DVD disc is in Main Unit, then a window will popup to show all available
Media Sources. Use navigation buttons to highlight the file name and press OK to
confirm/play. If you have multi Media Sources, use MODE buttons from remote or
front panel of Main Unit to select.
WARNING:
THIS MODEL AND ITS ENCLOSED CAR ADAPTOR ARE ONLY
COMPATIBLE WITH 12V VEHICLES.
THIS MODEL IS NOT COMPATIBLE WITH 24V VEHICLES. (TRUCK/BUS)
DO NOT CONNECT THE UNIT TO THE CAR VIA CAR ADAPTOR BEFORE
THE ENGINE HAS BEEN STARTED.
PLEASE NOTE:
THE BATTERY ONLY CAN BE CHARGED WHEN THE SWITCH IS IN OFF POSITION.
DISCONNECT THE CAR ADAPTOR WHEN IT IS NOT IN USE.
THE INTERNAL BATTERY IN MAIN UNIT ONLY SUPPORTS ITSELF BUT
NOT THE MONITOR.
QUICK INSTALLATION GUIDE
3
