unplug iron
wrapping cord
Switch the iron to
standby mode by
pressing the button.
Light will turn RED
store iron properly
step 3
step 2
step 4
For easy storage, the
power cord can be
wound loosely around
the iron once it has
cooled. Hook allows for
easy hanging storage.
step 1
Allow soleplate
to cool thoroughly,
then attach solemate™
(see page 8)
Iron should remain
unplugged when
not in use.
problem
things to check
solution
Iron does
not heat
Is the iron plugged in correctly?
Is the standby button green?
Check to make sure the plug is fully inserted into a working power outlet. Also make sure that
there are no other appliances which could overload the power outlet.
If the standby button is red and you are ready to iron, press the standby button to
change it to green.
Make sure the fabric selector is set to the right fabric setting.
Iron
produces
little to
no steam
Is there enough water in the tank?
Is iron hot enough?
Are you pressing the steam buttons?
The fabric selector must be set to ( •••) to produce steam. Wait until the lights on the steam
status light turn on to let you know that the soleplate is warm enough to make a good solid
steam burst.
Be sure to press the steam buttons repeatedly to start steam
fl
owing. After that each
push of the steam buttons should produce a burst of steam.
Troubleshooting
maint cleaning
Always clean the soleplate of a steam iron when it Is cool.
The soleplate should be cleaned if starch or other residue builds up.
When the iron is cool, wipe the soleplate with a soft, damp cloth. Or use commercially available soleplate cleaner and
follow the instructions according to the manufacturer.
Do not use abrasive cleaners or scouring pads, as this will damage the iron’s soleplate and its coating.
Mineral deposits from tap water can occur in the soleplate vents. To clean,
fi
ll the water tank and heat the iron to the highest (•••) setting. Once the iron is fully heated, unplug the iron and hold it over a sink.
Press the steam button repeatedly until water begins to drip out of the soleplate. Be careful, as this creates large amounts of steam.
Clean solemate™ by using water & soft dish soap. Let dry before installing it onto iron. Solemate™ is dishwasher safe.
If you have questions,
contact our customer service
1-800-899-5157 or customerservice@oliso.com
