H.PAIRING
EXTRA
HEADSET
Note:
There is no limit to the quantity of headsets that connect to one transmitter.
1).Switch off
"f"
the transmitter on/off switch before pairing extra headset.
2)
.Press
②
the headset on/off button to turn on the headset.The build‐in Led in headset will blink in red
slowly.Keep pressing the on/off button for 3 seconds,then,it will blink fast to enter the pairing period with
transmitter.
3)
.Switch on
"f"
the transmitter on/off switch to turn on the transmitter."a"the transmitter power indicator
will light up in red and blink fast to match with headset in 3 seconds,then stay in red after signal being
I.TROUBLE
SHOOTING
NO
SOUND?
>
The TV sound is "mute".The system can not work in TV mute mode.Keep at least a few volume of the
TV,then adjust the headset volume.
>
Make sure the transmitter is on,and the headset have fresh battery.If the headset's battery content is
low,sound distortion will be heard.Charge your headset.
>
Check if connected audio equipment is not playing.Start playing the equipment.
>
Make sure the connected audio equipment is ON and its volume is set properly.
>
The volume of headset is too low,adjust the volume to an appropriate level.Turn up your audio source's
volume.
DISTORTION?
>
Headset's battery is too low.Charge the headset.
>
Ensure the volume level or balance of headset is adjusted properly.
>
The input level of the audio signal is too low.Turn up the volume of the audio source equipment.
J.GUIDANCE
OF
TRANSMITTER
INDICATOR
You can know the system status by checking the transmitter indicator illustration of this wireless TV system.
1.Transimitter on,headset off‐>"a" transmitter indicator quartic blink continously
2.Transmitter on,headset on,no signal‐>"a"transmitter indicator double blink continously
3.Transmitter on,headset on,signal in‐>"a"transmitter indicator stay in red
4.Pairing mode‐>"a" transmitter indicator fast blink continously
K.CARE
AND
MAINTAINENCE
Any improper use may damage the unit and affect its functions.To best protect and care for this wireless TV
headset system,please read the following tips before using:
1.
Keep the transmitter and headset away from direct sun exposure.
2.
Turn off the transmitter and headset if not in use.
3.
Use a slightly damp cloth to clear the outside of the unit.Avoid letting any liquids into the system.
4.
Keep it our reach of the children.It may damage when a sudden drop down occurs.
