Open My computer ---Removable disk.
7.If my PC can't detect any new hardware when VME102 is connected to it. What should I do?
A: Change to another USB port.
If the problem still exists, please contact your service provider
8.When I connect VME102 to PC, why does the setup program can not start automatically?
A: For the Windows XP and Windows 2000, Click the Start
Run, and input gpedit.msc to open the
Group policy.
Please check whether the Turn off Autoplay was disabled.
Operations step: Select User Configuration
Administrative Templates
System
Turn off
Autoplay
You can set the Turn off Autoplay enabled or not configured in the properties.
9.What is the temperature limit up to which VME102 can operate?
A: The VME102 Data Card can be used between -10
and +55
.
10.While connecting, a Firewall Security Alert appears, what should I do?
A: In order to work correctly, VME102 must be allowed to connect through your firewall. If you
require further information on how to configure your firewall to allow this application, please contact
the vendor of your firewall software.
11.Why is the Micro-SD card not being recognized?
A: The card is not inserted correctly or is of the wrong size / format. Re-insert the card or try another
Micro-SD card and make sure the capacity and format is correct.
“
”
“
”
“
”
“
”
“
”
34
