14 |
Page
Oliver Machinery
10014 Planer
minimize dust. Use anti-skid floor strips on the floor area where the operator normally stands and
mark off machine work area. Provide adequate work space around the machine.
9.
ACCESS CONTROL
should be enforced so only trained personnel can access the work area and
operate the machine. Use childproof power switch when applicable.
10.
STAY ALERT
at all times. Do not operate this machine while under the influence of drugs/alcohol, or
when not feeling well.
11.
REPLACEMENT PARTS:
Use only genuine Oliver Machinery replacement parts and accessories
recommended for this machine. Generic parts made by other manufacturers may create a safety
hazard, and WILL void the factory warranty and other guarantees.
12.
PROPER USE:
Do not use this machine for other than its intended use. If used for other purposes,
Oliver disclaims any real or implied warranty and holds itself harmless for any injury or damage
which may result from that use.
Safety Guidelines Specific to Planer
Before Work Begin:
1.
USE ONLY NATURAL, SOLID WOOD.
Do not plane any material such as plywood, MDF, OSB,
laminate or anything that can disintegrate during operation. Do not plane treated lumber or
anything that contains harmful chemicals, as this will spread wood dusts that contain such harmful
chemicals. Do not attempt to plane workpiece with loose knots or with any other foreign materials.
2.
CHECK CUTTER INSERTS:
Make sure cutter inserts are sharp, clean, and free from damages. Forcing
dull/damaged cutter inserts to work invites accidents, and lowers the quality of the finish. Use
recommended amount of torque to securely fasten all inserts onto the cutterhead.
3.
SERVICING CUTTER INSERTS:
Wear heavy duty leather clothes to protect your hands when installing
new cutter inserts or rotating the existing ones. Ensure the cutterhead is thoroughly clean before
installing the insert. Debris between the cutter insert and the platform can create uneven pressure,
causing the insert to break, and body injuries may occur.
4.
SUPPORT LONG WORKPIECE
with
auxiliary
stock feeding rollers/tables. This will help avoiding
injuries and improve the quality of finish.
Summary of Contents for 10014
