10014 Planer
OLIVERMACHINERY.NET
27
|
Page
Controls and Components
ON / OFF Switches
To Turn Off
Machine
Press the “STOP” button.
NOTICE:
When STOP button is pressed, it needs to be
reset before the planer can start again. To reset,
rotate the serrated rim clockwise. The STOP button
will pop up when it is reset.
NOTICE:
The planer will shut down if it is overloaded.
Press STOP to reset overload protection.
To Turn On
Machine
Press the green “START” button.
NOTICE:
The machine will only start when the STOP
button is reset.
Cutterhead Height Adjustment
The cutterhead height adjustment handwheel is
located on the side of the planer, right below the
digital readout.
Turn
CLOCKWISE
to lower the cutterhead.
Turn
COUNTERCLOCKWISE
to raise the cutterhead.
Each rotation of the handwheel changes the height by
approximately 1/8” (3mm).
Cutterhead Height Scale
The cutterhead height scale is located on the right
column next to the digital readout. A metal pointer
marks the current height of the cutterhead.
Summary of Contents for 10014
