10014 Planer
OLIVERMACHINERY.NET
29
|
Page
Components for Planing Wood
This diagram shows components involved for planning a piece of wood:
How it works:
1.
When a workpiece enters the planer, with planer’s depth of cut properly set, it will clear the
depth limiter
[A]
. For workpiece less than 6”, it is possible to bypass the limiter and receive a
deeper cut.
2.
The anti-kickback fingers
[B]
then engage the workpiece to prevent accidental kick-back.
3.
As the workpiece moves further into the planer, it will engage the infeed roller
[C]
. The infeed
roller will bring the workpiece towards the chip breaker
[D]
and the cutterhead
[E]
.
4.
As the cutterhead cuts on the workpiece, the woodchips will be broken down by the chip
breaker.
5.
The chip breaker and the chip deflector
[F]
then divert the woodchips towards the dust port for
removal.
6.
As the workpiece leaves the cutter head, it will engage the outfeed roller
[G],
which helps
pulling the workpiece away from the planer.
7.
The workpiece will also engage the bed roller
[H]
which helps reducing resistance as the
workpiece moves along the planer table. The height of the bed roller can be adjusted to
accommodate workpiece with various roughness.
Summary of Contents for 10014
