6
Oliver 4455 - 20” Professional Planer
1. 20” Planer
Box 1
4. Leveling Pads
4. Hex Key Wrenches
4. Open End Wrenches
4. Leveling Bolts and Nuts
1. Knife Setting Gauge
2. Lifting Eye Bolts and Nuts
1. Knob for Handwheel
1. Handwheel
1. Handle
Box 2
1. Dust Chute
8. Hex Head Screws M6x10
Uncrating the Machine
Retain all packaging materials in case it
becomes necessary to ship the machine to
another site.
Machine Preparation and Setup
WARNING!
The equipment used to lift this machine must
have a rated capacity at, or above the weight
of the planer. Failure to comply may cause
serious injury!
The planer can be lifted from over head using
slings and the two lifting eye bolts (A, Figure 1).
There are two threaded holes for the eye bolts.
One is located in the right front corner and the
other is in left rear corner. Thread the eye bolt
into the hole at least half way and tighten the nut
(B, Figure 1).
Remove the eye bolts and save in case the
machine needs to be moved in the future.
Summary of Contents for 4455
Page 19: ......
