Oliver 723, User'S Operating And Instruction Manual

0723S20004   

 
 
If it seems necessary to adjust this guide loosen the two knobs which are on the top and 
to the inside of the table, then slide the guide in or out to conform with product width.  
Make a liberal adjustment to allow for product variances.  Re-tighten the knobs to secure 
it in the desired position. 
 
 
SLOW-DOWN DOOR ADJUSTMENT 
 
On the discharge end of the chute you will find a small adjustable door used to slow the 
product as it exits the blade.  Generally heavier products require a lower door setting 
while lighter products require less restriction.  The door is raised by turning the knob in a 
clockwise direction.  Turning the knob in the opposite direction will lower the door. 
 
Normally if a bun should stop beneath the door the next bun should dislodge it, if it does 
not then the door should be adjusted to provide less restriction. 
 

WARNING 

NEVER STICK YOUR HAND OR ANY OTHER OBJECT INTO EITHER 

END OF THE CHUTE.  ALWAYS KEEP YOUR HANDS AWAY FROM 

THE MOVING PARTS OF THE MACHINE.