13
ENGLISHENGLISHENGLISHENGLISHENGLISH
SPECIAL FEA
SPECIAL FEA
SPECIAL FEA
SPECIAL FEA
SPECIAL FEATURES
TURES
TURES
TURES
TURES
TW
TW
TW
TW
TWO-SIDED MODE
O-SIDED MODE
O-SIDED MODE
O-SIDED MODE
O-SIDED MODE
The following two-sided copying functions may be used to make copies from and onto both sides of the sheet:
a) from 1 to 2 sides (
from a one-sided original to a two-sided copy)
b) from 2 to 2 sides (
from a two-sided original to a two-sided copy, only if the photocopier is equipped with an RDF)
c) from 2 to 1 side (
from a two-sided original to a one-sided copy, only available if the photocopier is equipped
with an RDF)
d) from a book to 2 sides (
from adjacent pages of a book to a two-sided copy)
•
In two-sided mode, a maximum of 10 copies in A4, A4R and A5 and 2 copies in A3 may be set (100 for any
size if an RDF is fitted).
•
The copy paper used for two-sided copying must respect the following specifications:
–
Size:
from A5 to A3 (A5R and non-standard sizes cannot be used).
–
Weight:
from 64 to 80 g/m
2
a) From 1 to 2 sides (1
2)
This function enables you to make two-sided copies from one-sided originals.
To set two-sided mode, press the left TWO-SIDED MODE key (B5) until the
icon appears.
If you place the originals manually, after setting the desired number of copies, place the first original on the glass
platen and make a copy.
After the first original has been copied, a message (B4) prompting you to place the second original will blink.
Having copied the second original, the photocopier will feed out the two-sided copy. Once this has been done,
you may proceed to copy the following originals in the same way.
If you use the optional ADF or RDF, you must specify the number of originals so that, if there is an odd number,
the back of the last sheet will be left blank.
To enable the automatic original count, check that the
icon is selected and, if it is not, press the left TWO-
SIDED MODE key (B5) until it appears.
•
The automatic count is a standard setting: as soon as the START key (B38) is pressed, the ADF or RDF start
to count the originals.
•
If you are using the optional ADF, smooth out any folds in the sheets after the automatic count, having removed
them from the document tray (D4) and then reposition them for copying.
To disable the automatic count, thus speeding up the copying cycle, you can indicate whether there is an even
or odd number of originals yourself.
Press the left TWO-SIDED MODE key (B5) until the
icon (even number) or the
icon (odd
number) appears.
Then proceed to make copies in the normal way.
Having finished making copies, press the left TWO-SIDED MODE key (B5) until no icon is displayed or press the
RESET key (B34) to exit from two-sided mode and restore the standard copy settings.
SPECIAL FEATURES
SPECIAL FEATURES
SPECIAL FEATURES
SPECIAL FEATURES
SPECIAL FEATURES