25
ENGLISHENGLISHENGLISHENGLISHENGLISH
Replacing a Cassette
To replace a cassette, proceed as follows.
ADDING
ADDING
ADDING
ADDING
ADDING TTTTTONER
ONER
ONER
ONER
ONER
When the toner runs out, the toner out icon
(B11) starts to blink on the control panel. Take a new toner
cartridge and follow the procedure described below.
Grip the handle on the cassette and
pull it out as far as it will go.
Lift the cassette with both hands and
pull it slowly out of the photocopier.
Push the new cassette into the photo-
copier until it locks into position.
Open the front panel.
Keep the empty cartridge lever pres-
sed, turn it clockwise until it reaches a
horizontal position. Pull out the empty
cartridge.
Pick up the new cartridge and holding
it horizontally, shake it gently so as to
distribute the toner evenly inside it.
Push the new cartridge in gently until
it locks into position.
Take hold of the orange seal tab and
pull it out completely.
Turn the cartridge handle anti-
clockwise until it locks into position.
Make sure that it is firmly in position to
prevent leaks.
Close the front panel again.
Seal tab
ADDITIONAL FUNCTIONS
ADDITIONAL FUNCTIONS
ADDITIONAL FUNCTIONS
ADDITIONAL FUNCTIONS
ADDITIONAL FUNCTIONS
