Olivetti Copia 9916, Instructions Manual

5 - 2

SPECIAL

COPYING

FEATURES

7. Press 

Set

.

❏

Confirm that the size and direction of the paper
in the paper cassette is the same size and in the
same direction as the original.

8. Use  the  numeric  keypad  to  enter  the  number  of

copies required.

❏

You can select from 1 to 99 copies.

❏

For one copy only, you do not need to enter the
number of copies.

❏

If  you  make  a  mistake,  press 

Clear

  and  start

again.

9. Press 

Start

 to begin copying.

CANCELLING ORIGINAL FRAME ERASE SETTINGS

Pressing  the  Stop  button  cancels  the  original  frame
erase settings.

■

Pressing  the 

Stop

  button  returns  all  settings,

including the number of copies and the scanning
mode, to their default settings.

■

Pressing the 

Stop

 button after copying has started

may cause a blank sheet to be output.

NOTE:

•

The original frame erase margin can be adjusted
between 1 and 20 mm. The default setting is 2 mm.

•

The original frame erase feature cannot be selected
at  the  same  time  as  the  binding  margin  copy
feature, or the 2 on 1 copy feature.

ERASING SHADOWS FROM THE EDGE OF COPIES
(SHEET FRAME ERASE)

To set a 7 mm blank margin around the borders of the
paper, follow the steps below.

1. Press 

COPY

 to switch to copy mode.

2. Set the original on the platen glass.

❏

If necessary, you can adjust the copy exposure
and image quality.

3. Press 

Copy Special Features

.

4. Press 

F3

 (FRAME ERASE).

5. Press 

F2

 (SHEET FR ERS).

6. Confirm that the paper in the paper cassette is the

same size and in the same direction as the original.

❏

If necessary, change or readjust the paper in

the paper cassette.

❏

If you have installed one of the optional paper

cassettes, you can use 

F2

 (PAPER SELECT)

to select a different paper size.

7. Press 

Set

.

❏

If you do not press 

Set

 within three seconds of

selecting  the  copy  paper  size,  your  selection
will automatically be set without you having to
press 

Set

.

8. Use  the  numeric  keypad  to  enter  the  number  of

copies required.

❏

You can select from 1 to 99 copies.

❏

For one copy only, you do not need to enter the
number of copies.

❏

If you make a mistake, press 

Clear

 and start

again.

9. Press 

Start

 to begin copying.

CANCELLING SHEET FRAME ERASE SETTINGS

Pressing the 

Stop

 button cancels the sheet frame erase

settings.

❏

Pressing  the 

Stop

  button  returns  all  settings,

including the number of copies and the scanning
mode, to their default settings.

❏

Pressing the 

Stop

 button after copying has started

may cause a blank sheet to be output.

NOTE:

•

The sheet frame erase margin cannot be changed.

•

The sheet frame erase feature cannot be selected
at  the  same  time  as  the  binding  margin  copy
feature, or the 2 on 1 copy feature.

ERASING SHADOWS FROM THE CENTRE LINE OR
EDGE OF COPIES (BOOK FRAME ERASE)

To eliminate the dark border area and centre shadow
when  copying  facing  pages  in  a  book  or  magazine,
follow the steps below.

1. Press 

COPY

 to switch to copy mode.

2. Set the original on the platen glass.

❏

If necessary, you can adjust the copy exposure

and image quality.

3. Press 

Copy Special Features

.

4. Press 

F3

 (FRAME ERASE).

5. Press 

F3

 (BOOK FR ERS).

6. Press 

F4

 (ORIGNAL SIZE) to select the size of the

original.

❏

The  selection  changes  every  time  you  press

F4

.

7. Press 

Set

.

8. Use the numeric keypad to enter the centre frame

erase width.

❏

You can also use 

F3

 (–) or 

F4

 (+) to select the

width.

❏

You can select a width from 3 to 50 mm.

mm

2 0

CANCEL: RETURN

ENTER THE FRAME ERASE WIDTH

–

+