manualshive.com logo in svg

Olivetti d-Color MF 4003, Service Manual

The Olivetti d-Color MF 4003 is a high-quality, multifunctional printer that offers exceptional performance and reliability. To assist users in maximizing their experience, a comprehensive service manual is available for free download from our website. This manual provides detailed instructions and troubleshooting tips to ensure smooth operations.

Share
Download
background image

d-Color MF4003/MF3303

H UTILITY MODE > 12. Supplementary explanation of utility mode

H-39

Setting item

Default setting

Synchronize IP Address

○

(Except for North America)

Synchronize Subnet Musk

No Filtering

○

(North America)

NOTE

▪ Quick IP Filtering activates automatically.

<Synchronize IP Address>

• IPv4 address: Only reception by an IP address with the upper 3 bites same as that of the IP address set in the MFP is allowed.

NOTICE

• If the MFP IP address is set to [192.168.0.134], the filtering range is as follows.

192.168.0.0 to 192.168.0.255

• IPv6 address: Only Global Unicast Address (2000::/3) is available. Only reception by an IP address with the upper 64 bits same as that of

the IP address set in the MFP is allowed.
NOTICE

• If the MFP IP address is set to “2345:1:2:3:4:5:6:7”, the filtering range is as follows.

2345:1:2:3::0 to 2345:1:2:3:FFFF:FFFF:FFFF:FFFF

<Synchronize Subnet Musk>

• IPv4 address: Use the IP address set in the MFP and the Subnet Mask to allow receptions by IP addresses within the range belongs to the

same network.
NOTICE

• If the MFP IP address is set to [150.16.17.134] and the Subnet Mask is set to [255.255.252.0], the filtering range is as follows.

150.16.16.*** to 150.16.19.****

• If the Subnet Mask has not been set, or it has been set to [0.0.0.0], only accesses from the IP address with the end differs from that of

the IP address set in the MFP are restricted. As a result, filtering runs in the same way as that it has been set in [Synchronize IP
Address].

• IPv6 address: Only Global Unicast Address (2000::/3) is available. And use the Global IP address and Prefix to perform filtering.

NOTICE

• If the MFP IP address is set to [2345:1:2:3:4:5:6:7], and the Prefix is set to [/64], the filtering range is as follows.

2345:1:2:3::0 to 2345:1:2:3:FFFF:FFFF:FFFF:FFFF

• If the Prefix has not been set, filtering runs in the same way as that the Prefix is set to 64 bit.

<No Filtering>

• For both IPv4 address and IPv6 address, no filtering is performed.

Web Conn.setting

• To set whether to use the Web Connection.

NOTE

▪ To use the Web Connection, enable “JavaScript” and “Cookie” of the Web browser.
▪ If the MFP is connected to the internet via a proxy server, register the Proxy Settings of the Web browser as “Exceptions.”
▪ When the Web Connection is not displayed properly even if the above settings have been conducted, delete the cache of the Web

browser.

Setting item

Default setting

ON

○

OFF

Security Warning Display Setting

• To select whether or not to display the Security warning screen if an administrator password is still remained as default setting or does not

meet the password rules.

Setting item

Default setting

ON

○

(Except for North America)

OFF

○

(North America)

12.4  User Authentication/Account Track

12.4.1  Authentication Device Settings

• It will be displayed when [Service Mode] -> [Billing Setting] shows that the authentication device 2 is mounted.
• It will be displayed when [Administrator] -> [Network] -> [IWS Settings] is set to “ON.”

Authentication Type

• Specifies a device used for user authentication.

Card
Authentication

IC Card type setting

Select the type of the required IC card.

• To use the FeliCa card, select [FeliCa], [SSFC], [FCF], [FCF (Campus)] or [FeliCa (Proprietary

Card)]. When [SSFC] is selected, detailed information such as the company code or company
identification code is registered.

• To use the Type A card, select [Type A].
• To use the FeliCa and Type A cards together, select [TypeA], [SSFC+TypeA], [FCF+Type

A], [FCF(Type A], or [FeliCa(Proprietary Card)+Type A]. When [SSFC+TypeA] is
selected, detailed information such as the company code or company identification code is
registered.

• To use NFC, select [NFC(HCE)].
• To use the Type A card with NFC, select [TypeA+NFC(HCE)].

Y119930-3

Service Manual

Summary of Contents for d-Color MF 4003

















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for d-Color MF 4003

Ricoh FT8680 Service Manual preview
FT8680
Brand: Ricoh Pages: 389
Sharp SF-2214 Operation Manual preview
SF-2214
Brand: Sharp Pages: 44
Sharp AR-C240P Software Installation Manual preview
AR-C240P
Brand: Sharp Pages: 20
Sharp SF-2216 Getting Started Manual preview
SF-2216
Brand: Sharp Pages: 72
Sharp SF-2214 Service Manual preview
SF-2214
Brand: Sharp Pages: 128
Triumph Adler DCC 2526 Instruction Handbook Manual preview
DCC 2526
Brand: Triumph Adler Pages: 311
Sanyo SFT-Z91 Service Manual preview
SFT-Z91
Brand: Sanyo Pages: 226
Xerox 2006NPC - DocuColor Color Laser Use Manual preview
2006NPC - DocuColor Color Laser
Brand: Xerox Pages: 8
Mita PointSource Ai 3010 Service Manual preview
PointSource Ai 3010
Brand: Mita Pages: 478
Ricoh FW750 Manual preview
FW750
Brand: Ricoh Pages: 74

Brands by name

Popular brands

Load more brands