Olivetti d-Color MF 4003 Service Manual Download

Page: 260 / 688

d-Color MF4003/MF3303

I SERVICE MODE > 10. System 2

I-44

Setting item

Setting Value

Default setting

CMY

0 to +25 (step: 1)

0 to +28 (step: 1)

Near Life Display Settings

• To set whether or not to display the life warning of individual consumables.
• When [Do Not Display] is selected, a warning is not displayed at the time of life detection.

However, in CS Remote Care, life warning is normally sent to the center regardless of this setting.

NOTE

▪ The settings of software Dip switch No.227 (bit7) and switch No. 230 (bit3) have priority.

Setting item

Setting value

Default setting

Individual consumables

Display

○

Do Not Display

10.5 Software Switch Setting

• To set the operating characteristic of each function from software switch depending on what types of printing are normally made.

Touch [Switch No.] and enter the intended switch number with the 10-key pad.

Touch [Bit Assignment].

Use [<-] or [->] to select a bit. To set the bit, enter 0 or 1 with the 10-key pad.

To set the bit in hex, touch [HEX Assignment] and use the 16key pad and [A] to [F] keys to enter numbers and characters.

Touch [Fix].

Software Switch Setting list

The list of the setting values of Software Switch Setting can be print from [Service Mode] -> [List Output] -> [Machine Management List].

NOTE

▪ For switches not mentioned in the list below, use them in the default value unless indicated otherwise.

Switch No.

Function

012

Addition of the authentication device

025

FW function version setting

033

Renders some functions, which were available when both administrator authentication and key counter were provided with
when using the vendor, available only with administer authentication.

049

HEX 00 - HEX0A

The upper limit of copies that can be input through the control panel of this machine is set.

HTML 80

Scan setting only when Sort is selected for a copy cycle to be run with originals placed on the original
glass.

051

Settings for the life warning/replace display of the units

069

When printing using the manual bypass tray in a custom size, allows for printing only with a printer driver settings.

070

Setting for alarm sound and screen display for communication errors occurring due to CSRC causes.

072

Import/export function of the address book through the USB memory

121

When using the ADF, and an original multi-feed trouble is detected, select whether or not to apply Problem Unit Isolation

124

Function to restrict the file type of TX Fax

135

Setting for ID length of the HID Prox card

143

Expansion setting of the touch panel sensitive area when the web browser function is used

145

HEX 01

Switching to Auto detection for paper size in manual bypass tray

HEX 02

Switching paper feed mode if the size of paper fed from the manual bypass tray is mismatched

HEX 04

Displaying message when the paper size in manual bypass tray is mismatched with the paper size
specified on the control panel

HEX 08

When running a copy cycle with originals placed on the original glass, and [Auto] is displayed in
"Group/Sort" of the finishing function, [Auto] will be set as default. ("Sort" and "Offset" will be executed
when [Auto] is selected.)

HEX 10

Switch-over settings of Duplex printing and Billing permission
Setting for allowing/prohibiting billing on exited paper when a paper size error occurred at the time of
duplex printing

Olivetti d-Color MF 4003, Service Manual

Search results

Summary of Contents for d-Color MF 4003

Reviews:

Related manuals for d-Color MF 4003

Brands by name

Popular brands