manualshive.com logo in svg

Olivetti d-Color MF 4003, Service Manual

The Olivetti d-Color MF 4003 is a high-quality, multifunctional printer that offers exceptional performance and reliability. To assist users in maximizing their experience, a comprehensive service manual is available for free download from our website. This manual provides detailed instructions and troubleshooting tips to ensure smooth operations.

Share
Download
background image

d-Color MF4003/MF3303

I SERVICE MODE > 13. State Confirmation

I-71

• If starts by turning ON the main power switch, turn OFF the main power switch.

6.

If [NG] is displayed, carry out procedure “Troubleshooting when NG is detected.”

NOTE

▪ It takes approx. 200 seconds for check if all items are OK.
▪ When the trouble code (C6###, C91##, CE301, CE304) is displayed, the self-diag. (Full) may not complete. In that case, finish the

Self-diag. (Full), and perform the troubleshooting against each trouble code.

▪ When operation is disabled (screen frozen) during displaying the diagnosis result confirmation screen, turn OFF the main power

switch to finish the diagnosis. Wait for 10 sec. or more, and turn ON the main power switch.

▪ If Self-diag. (Full) is started by turning ON the main power switch, it cannot move to Normal Mode or Service Mode. To change the

mode, turn OFF the main power switch, and turn it ON again after 10 seconds.

Auto Execution of Self-diag. (Full)

• Set the [Switch NO.163] to [00000010] at [Bit assignment] and [02] at [HEX assignment] in [Service Mode] -> [System 2] -> [Software

Switch Setting], so that the “Self-diag. (Full)” can be executed automatically when a “trouble code” occurred.

NOTE

▪ If this function is set on a client MFP, make sure to reset the settings after completing an operation check and troubleshooting.

Sequence of Auto Execution of Self-diag. (Full)

1.

Errors are detected. (Trouble codes are displayed, and the MFP stops.)

2.

The MFP reboots automatically. (The MFP reboots automatically up to three times.)

3.

The Self-diag. (Full) is executed automatically.

4.

After completing the Self-diag. (Full), the MFP stops with the self diagnosis screen being displayed.

5.

If [OK] is displayed for all diagnosis items, turn OFF the main power switch to finish the Self-diag. (Full).

6.

If [NG] is displayed, carry out “Procedure (when NG is detected).”

When NG is detected

1.

If [NG] is displayed, the [Error Code] key appears to the self diagnosis screen.

2.

Touch the [Error Code] key to display the [Error Code] screen.

3.

Check the displayed “Error Code”, and turn OFF the main power switch.

4.

Refer to [TROUBLESHOOTING/Error code list], and preform the troubleshooting against each error code.

13.12.3  Self-diag. (Individual)

(1)  I2C Check

• To check each item of the I2C individually.

Diagnosis item

Relevant electrical parts

TPM

TPM board (TPMB), CPU board (CPUB), Base board (BASEB)

AUDIO (Control)

CPU board (CPUB), Base board (BASEB)

PS-CPU

CPU board (CPUB), Base board (BASEB)

<Procedure>

1.

Select the desired diagnosis key. (Two or more keys can be selected.)

2.

Press the Start key to start the check procedure.

3.

The check result will be displayed. (OK/NG)

4.

If [OK] is displayed, touch [END].

5.

If [NG] is displayed, execute the Self-diag. (Full).

(2)  Sys/Image mem check

• To check each item of system memory and image memory.

<Procedure>

1.

Press the Start key to start the check procedure.

2.

The check result will be displayed. (OK/NG)

NOTE

▪ If a trouble occurs on the memory, the self diagnosis may not complete. In that case, finish the Self-diag. (Full) forcibly,

and perform the troubleshooting against each trouble code.

▪ Turning OFF the main power switch will finish the Self-diag. (Full) forcibly.

3.

If [OK] is displayed, touch [END].

4.

If [NG] is displayed, execute the Self-diag. (Full).

NOTE

▪ NG will also be displayed if no DIMM is mounted. If an additional DIMM is not used, no error occurs even if NG is displayed,

and no troubleshooting is required.

(3)  Various USB Check

• To check each item of the USB Device individually.

<Procedure>

1.

Select the desired diagnosis key. (Two or more keys can be selected.)

2.

Press the Start key to start the check procedure.

3.

The check result will be displayed. (OK/NG)

NOTE

•

When checking [USB Device], [NG] will be displayed if the fax board is mounted and the mounting settings are not
enabled.

•

When checking [Keyboard] or [USB Memory], [NG] will be displayed if no device is connected.

1.

If [OK] is displayed, touch [END].

2.

If [NG] is displayed, perform the following procedures.

• If [NG] is displayed for [USB Device], execute the Self-diag. (Full).
• If [NG] is displayed for [Keyboard], perform “TROUBLESHOOTING/ Troubleshooting when NG is detected on keyboard.”
• If [NG] is displayed for [USB Memory], perform the “TROUBLESHOOTING/ when NG is detected on USB memory.”

Y119930-3

Service Manual

Summary of Contents for d-Color MF 4003

















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for d-Color MF 4003

Olivetti d-Color MF280 Installation Manual preview
d-Color MF280
Brand: Olivetti Pages: 15
Xerox Document Centre 50 Installation Manual preview
Document Centre 50
Brand: Xerox Pages: 142
Samsung MultiXpress X4 Series Service Manual preview
MultiXpress X4 Series
Brand: Samsung Pages: 609
Canon iR3245 Manual preview
iR3245
Brand: Canon Pages: 634
Canon IR5000 - iR B/W Laser Service Handbook preview
IR5000 - iR B/W Laser
Brand: Canon Pages: 252
Canon NP-2020 Service Manual preview
NP-2020
Brand: Canon Pages: 207
Canon iR6800C Service Bulletin preview
iR6800C
Brand: Canon Pages: 10
Canon iR5570 Series Service Manual preview
iR5570 Series
Brand: Canon Pages: 684
Canon NP1550 Service Manual preview
NP1550
Brand: Canon Pages: 136
Canon iR5055 User Manual preview
iR5055
Brand: Canon Pages: 98
Canon iR3025 User Manual preview
iR3025
Brand: Canon Pages: 348
Canon iR5570 Series Manual preview
iR5570 Series
Brand: Canon Pages: 508
Canon NP-70 Service Manual preview
NP-70
Brand: Canon Pages: 243
Minolta EP2051 Operator'S Manual preview
EP2051
Brand: Minolta Pages: 101
Minolta EP1030 User Manual preview
EP1030
Brand: Minolta Pages: 83
Minolta EP2010 Operator'S Manual preview
EP2010
Brand: Minolta Pages: 106
Minolta EP1052 Manual preview
EP1052
Brand: Minolta Pages: 112
Minolta EP1083 Operator'S Manual preview
EP1083
Brand: Minolta Pages: 130

Brands by name

Popular brands

Load more brands