Olivetti d-Color MF 4003 Service Manual Download | Manualshive

Page: 338 / 688

background image

d-Color MF4003/MF3303

I SERVICE MODE > 17. Network Settings

I-122

17. Network Settings

17.1 2nd Network Setting

NOTE

▪ Before making settings, note the network environment of the customer and make the settings to suit the environment.

2nd network card settings

• To be configured when an optional Upgrade Kit (wireless LAN) has been installed in this machine.

NOTICE

• To perform a remote control from an Android tablet terminal or iOS terminal,

d-Color

Remote Access are required.

Setting item

Contents

Default setting

Set

To be selected to install optional wireless LAN devices.

Unset

To be selected not to install optional wireless LAN devices.

○

NOTE

▪ When [Set] is selected, make sure that the set wireless LAN is displayed, and configure the following settings.

Network interface structure

• To connect the MFP main unit as a wireless LAN adapter to a wireless LAN access point connected to the LAN environment. (when

Wireless Only or Wired+Wireless (Secondary Mode) is selected)

• To perform direct communication between the MFP main unit and a mobile device. (when Wired+Wireless (Primary Mode) or Wired

+Wireless (Wi-Fi Direct) is selected)

Network Interface Settings

Description

Wired Only

Select this option to use this machine only in the wired LAN environment.

Wireless Only

Select this option to use this machine only in the wireless LAN environment.
A job is received from the client via the wireless LAN access point and executed.

Wired+Wireless (Secondary Mode) Select this option to use this machine in both the wired LAN environment and wireless LAN environment.

To execute a job received from a client via the LAN.
A job is received from the client via the wireless LAN access point and executed.

Wired+Wireless (Primary Mode)

Select this option to use this machine in both the wired LAN environment and wireless LAN environment.
The main body is used as a wireless LAN access point.
When starting up the main body, perform wireless LAN communication between the main body and the
mobile device (Android device, iOS device, or devices supporting Wi-Fi) without via wireless LAN access
point.

Wired+Wireless (Wi-Fi Direct)

Select this option to use this machine in both the wired LAN environment and wireless LAN environment.
The main body is used as a wireless LAN access point.
With this mode, a mobile device (excluding iOS) can be connected to Wi-Fi Direct authentication devices
easily.

17.2 Remote Service Setting

17.2.1 Function Setting

Enable Settings

• To set whether to use the remote service.

NOTE

▪ When [ON] is selected, [Service Mode] -> [Machine Update Setting] -> [Machine Auto Update setting], [Auto Update setting] will

not be displayed.

▪ When [ON] is selected, [Service Mode] -> [Machine Update Setting] -> [Machine Auto Update setting], [Relay server setting] will

not be displayed.

Setting item

Default setting

ON

Disable

○

Server Settings

• To set URL, ID and password of the server to be used on remote service communication.

Setting item

Setting

URL

(Address or host name): port number

• Address: IPv4 or IPv6 address
• Host name: Alphanumeric characters and symbols up to 253 characters

ID

Alphanumeric characters and symbols: 1-64 characters

Password

Alphanumeric characters and symbols: 0-64 characters

17.2.2 Proxy Server Setting

Enable Settings

• To set whether to use the proxy server.
• When [ON] is set, the [WebDAV Synchronize] and [Proxy Server] settings can be configured.

Setting item

Default setting

ON

Disable

○

Service Manual

Y119930-3

«
...
336
337
338
339
340
...
»

Summary of Contents for d-Color MF 4003

















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for d-Color MF 4003

Brand: Ricoh Pages: 160

Brand: Advanced Technology International USA Pages: 31

Brand: Xerox Pages: 146

Brand: Olivetti Pages: 160

Brand: Oki Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands