d-Color MF4003/MF3303
I SERVICE MODE > 18. Machine Update Setting
I-130
Setting item
Description
Setting
Update Time
Touch Clear to set the time to update the machine.
Time
00 to 23 o’clock
Minute
00 to 59 Minutes
Polling Settings
To set the polling period or day of the week and clock
for obtaining the update list.
Set Interval.
1 to 240 Minutes
Select Day of the Week To set the day of the week
and clock.
Repeat Interval
Set the period for retrying when failed to obtain.
• 1 to 240 Minutes
(4) Data Update
Download the update data
• The MFP confirms the program update information file in the program server with an interval set at [Polling Interval].
• The MFP compares the program update information file in the program server with that in the MFP, and starts downloading the update
data with a changed Version number.
Data auto update
• If the MFP power is set to ON at the time set with [Service Mode] -> [Machine Update Setting] -> [Machine Auto Update setting] -> [Auto
Update setting] -> [Common Settings] -> [Update Time], the firmware will be rewritten automatically. If the power is set to OFF at that
time, no rewriting will be executed.
Data update from control panel
• Select [Service Mode] -> [Machine Update Setting] -> [Machine Auto Update setting] -> [Manually Update] -> [Start], then execute
rewriting.
NOTE
▪ Do not set the power to OFF under the following state.
▪ Touch [Manually Update] -> [Start] to the next operation of the MFP (Auto Power OFF).
▪ About one minute after the download completed screen being displayed, the MFP will restart.
▪ When rewriting configuration files followed by the firmware, the MFP will restart again.
(5) Error code
• The error code can be displayed using [Service Mode] -> [Machine Update Setting] -> [Machine Auto Update setting] -> [Update Log
Display], or viewed on the PC where the log which saves up to 100 records sent by using [Transmission log Update] is received.
When using SMB protocol
Error code
Cause of error
Solution
N00107
• Cannot access the SMB server
• Set the IP address of the server or the server name correctly.
• Confirm that if the server runs normally.
N04096
N04097
• Authentication error
• Set the ID and the password correctly.
N04098
N04105
• SMB connection error
• Check the SMB connection setting again.
N04106
• Cannot obtain C_UpdateList.ini
• Cannot find the data described in
C_UpdateList.ini
• Confirm that if C_UpdateList.ini is stored in the server, and set the file path
for accessing C_UpdateList.ini correctly.
• Set the folder name and the file path correctly.
When using the HTTP protocol
Error code
Cause of error
Solution
N00107
• Cannot access the HTTP server
• Set the IP address of the server or the server name correctly.
• Confirm that if the server runs normally.
N00401
• Authentication error
• Set the ID and the password correctly.
N00404
• Cannot obtain C_UpdateList.ini
• Cannot find the data described in
C_UpdateList.ini
• Confirm that if C_UpdateList.ini is stored in the server, and set the file path
for accessing C_UpdateList.ini correctly.
• Set the folder name and the file path correctly.
Common in all cases
Error code
Cause of error
Solution
C00000
• XML setting error
• Make sure that the settings in each configuration file are correct.
C00001
• Decryption error
• Set the decryption password for the configuration files correctly.
D00001
• Format related error (software SW)
• Check for errors in the SoftwareDipSW.csv file.
D00010
• DipSW number not defined (software
SW)
D10001
• Format related error (Engine DipSW)
• Check for errors in the EngineDipSW.csv file.
D10010
• DipSW number not defined (Engine
DipSW)
F00000
• Firmware update error
• Check to see if the file on the server is correct.
F10107
• The file is not the firmware file
• Check to see if the file on the server is correct.
F10109
N00100
• Network communication error
• Check the connection to the network cable and communications settings.
N00110
Service Manual
Y119930-3
Summary of Contents for d-Color MF 4003
