manualshive.com logo in svg

Olivetti d-Color MF 4003, Service Manual

The Olivetti d-Color MF 4003 is a high-quality, multifunctional printer that offers exceptional performance and reliability. To assist users in maximizing their experience, a comprehensive service manual is available for free download from our website. This manual provides detailed instructions and troubleshooting tips to ensure smooth operations.

Share
Download
background image

d-Color MF4003/MF3303

J BILLING SETTING/ENHANCED SECURITY/DEBUG SETTINGS > 1. BILLING

SETTING

J-4

Authentication device

Loadable driver name (

OLI

 standard setting)

Compatible IC cards

USB keyboard emulation card
readers

KeyboardEmu loadable driver

Depends on the card reader *

•

*: The card type is reported to the authentication program as an extended card type.

Note *2

▪ Vendor ID and Product ID are identification information to specify USB devices.
▪ Check Vendor ID and Product ID of the USB device to be connected as follows:

▪ Refer to the specification of the device or ask the vendor.
▪ Connect the device to a Windows PC and check "Property" in "Device Manager.”

(4)  Miscellaneous card readers

• The same setting method as that for AU-201S applies for other card readers.
• The following loadable drivers are necessary.
• Use the loadable driver in advanced combination with the firmware version.

Authentication device

Loadable driver name (

OLI

 standard setting)

Compatible IC cards

SCL-010

SCL-010 loadable driver (Default: TypeA) (*1)(*2)

TypeA, FeliCa IDm, Mifare

OMNIKEY 5427CK (AU-205H)

5427CK (AU-205H) loadable driver (*2)

HID Prox, HID iCLASS, TypeA, FeliCa
IDm (*4)

KM USB Reader v2 MultiReader HF

Loadable driver for YSoft card reader (Default: HID
Prox) (*3)

Mifare

KM USB Reader v2 Legic Advant

LEGIC

KM USB Reader v2 ASK FSK 125kHz

EM4100, EM4102, RFID 125kHz

KM USB Reader v2 Mot/Ind W26

Indala

KM USB Reader v2 HID Prox

HID Prox

KM USB Reader v2 HID iCLASS

HID iCLASS

Note *1

▪ A combination of the loadable driver and the IC card information setting file will be supplied as a loadable driver by 

OLI

.

Note *2

▪ If cards of HID iClass of OMNIKEY 5427CK (AU-205H) that require detailed settings are to be used, make the detailed settings

by using either one of the following methods:

▪ Using the Auth Device Tool Advanced for 5427CK (AU-205H), prepare a combination of the loadable driver and the IC card

information setting file and export it as a loadable driver.

▪ Using the Auth Device Tool Advanced for 5427CK (AU-205H), prepare the IC card information setting file only and install

the loadable driver in the MFP. Then, using the Data Administrator, write the IC card information setting file in the MFP.

▪ Reference “

 D.2.1.2 IC card information setting procedures

”

Note *3

▪ If a YSoft card reader is used, all types of card will be reported as HID Prox card to the authentication program.
▪ To report the card type other than HID Prox to the authentication program, choose the corresponding card type shown in the

following list.

Card Reader Name

Readable Card Type

Card type to be reported to the

authentication program (Default)

(*3-3,*3-5)

IC Card Information Setting (card type

to be reported) (*3-4)

KM USB Reader v2
MultiReader HF

Mifare

HID Prox

TypeA (1) (*3-1,*3-2)

KM USB Reader v2 Legic
Advant

LEGIC

HID Prox

TypeA (1) (*3-1,*3-2)

KM USB Reader v2 ASK FSK
125kHz

EM4100, EM4102, RFID
125kHz

HID Prox

EM4100/
EM4102/
RFID 125kHz

KM USB Reader v2 Mot/Ind
W26

Indala

HID Prox

Indala

KM USB Reader v2 HID Prox

HID Prox

HID Prox

HID Prox (1) (*3-2)

KM USB Reader v2 HID
iCLASS

HID iCLASS

HID Prox

HID iCLASS (1) (*3-2)

•

*3-1 The content (ID) to be read from the type A card setting differs from which to be read by using AU-201S.

•

*3-2 When add the YSoft card reader to the authentication network composed of the present AU-201S, the ID may vary
depending on the card reader. Therefore, it is required to set the card type to TypeA (1), HID Prox (1) or HID iCLASS (1) and
register the card again.

•

*3-3 For the content to be read from the HID Prox card, since the ID length is fixed to 16 bytes, the unused part will be bridged
with 0xFF.

•

*3-4 If a card type other than HID Prox is selected, the card ID type will be set to up to 512 bytes, the card ID length will be
reported together with the card ID.

•

*3-5 If the card type is set to HID Prox by using the LDAP-IC card authentication, specify the card ID type to be sent to the LDAP
server as shown below.
1. Software switch No.135 Hex: 00 Reports that the 1st byte shows the ID length of the card, the 2nd byte and after shows the
card ID. (Default)
2. Software switch No.135 Hex: 01 Reports the card ID with the ID length including the 1st byte.

Note *4

▪ To use FeliCa, make either of the following settings.

▪ Select [FeliCa] at [Administrator] -> [User Auth/Account Track] -> [Authentication Device Settings] -> [Card Authentication]

-> [IC Card type].

Service Manual

Y119930-3

Summary of Contents for d-Color MF 4003

















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for d-Color MF 4003

Oce 7055 User Manual preview
7055
Brand: Oce Pages: 68
Oce 31x5E Configuration And Maintenance Manual preview
31x5E
Brand: Oce Pages: 156
Kyocera BF-720 Operation Manual preview
BF-720
Brand: Kyocera Pages: 44
Olivetti DF-650 Service Manual preview
DF-650
Brand: Olivetti Pages: 160
Xerox Document Centre ColorSeries 50 User Manual preview
Document Centre ColorSeries 50
Brand: Xerox Pages: 261
FujiFilm DryPix 7000 Service Manual preview
DryPix 7000
Brand: FujiFilm Pages: 150

Brands by name

Popular brands

Load more brands