d-Color MF4003/MF3303
J BILLING SETTING/ENHANCED SECURITY/DEBUG SETTINGS > 2. ENHANCED
SECURITY
J-18
2. ENHANCED SECURITY
2.1 Outline
Starting procedure
1.
Call the initial screen of Service Mode.
2.
Press the following keys in this order.
• Stop -> 0 -> Clear
3.
Call the Enhanced Security screen.
Exiting procedure
1.
Touch [Exit].
2.
Turn OFF the main power switch. Wait 10 seconds, then turn ON the main power switch again.
2.2 CE Password
• To set and change the CE password.
• The CE password needs to be 8 to 64 one-byte alphameric characters and symbols.
• Default setting: 9272927292729272
<Procedure>
1.
Current Password: Enter the currently using CE password.
2.
New Password: Enter the new CE password.
3.
Re-input Password: Enter the new CE password again.
NOTE
▪ When Password Rules of [Administrator] -> [Security] -> [Security Details] is set to “ON,” new passwords cannot contain the
same string of characters nor can be previous passwords be used.
▪ A new password is set when starts from the service mode after changing.
▪ NEVER forget the CE password. When forgetting the CE password, call responsible person of
OLI
.
2.3 Administrator Password
• To set and change the administrator password.
• Use this function when the administrator forget the administrator password because a new password can be set without entering the
current administrator password with this.
• The administrator password needs to be 8 to 64 one-byte alphameric characters and symbols.
• Default setting: 1234567812345678
<Procedure>
1.
New Password: Enter the new administrator password.
2.
Re-input Password: Enter the new administrator password again.
NOTE
▪ When Password Rules of [Administrator] -> [Security] -> [Security Details] is set to “ON,” new passwords cannot contain the
same string of characters nor can be previous passwords be used.
2.4 Administrator Feature Level
• To set which modes to be allowed for the administrator to use in Service Mode.
• Use when allowing the administrator to use some modes in Service Mode.
Setting item
Contents
Default setting
Level1
Extend the administrator function Level 1.
Level2
Extend the administrator function Level 2.
Prohibit
Prohibit the administrator feature extend.
○
Administrator feature level extension item
Administrator settings function
Level 1
Level 2
System Settings
Expert Adjustment
Printer Adjustment
Erase Leading Edge
-
○
Vertical Adjustment
-
○
Scanner Area
Scanner Adjustment: Leading Edge
-
○
Scanner Adjustment: Centering
-
○
Horizontal Adjustment
-
○
Vertical Adjustment
-
○
ADF Adjustment
Centering
-
○
Original Stop Position
-
○
Centering Auto Adjustment
-
○
Auto Adj. of Stop Position
-
○
User Paper Settings
-
○
Standard Size Setting Original Glass Original Size Detect
-
○
Foolscap Size Setting
-
○
2.5 CE Authentication
• To determine whether or not to authenticate CE password as entering Service Mode.
Service Manual
Y119930-3
Summary of Contents for d-Color MF 4003
