manualshive.com logo in svg

Olivetti d-Color MF 4003, Service Manual

The Olivetti d-Color MF 4003 is a high-quality, multifunctional printer that offers exceptional performance and reliability. To assist users in maximizing their experience, a comprehensive service manual is available for free download from our website. This manual provides detailed instructions and troubleshooting tips to ensure smooth operations.

Share
Download
background image

d-Color MF4003/MF3303

J BILLING SETTING/ENHANCED SECURITY/DEBUG SETTINGS > 2. ENHANCED

SECURITY

J-26

1.

Connect the USB cable of an external HDD to the USB port of an MFP. (USB NG will be displayed when the HDD is not recognized
correctly.)

2.

Call the Service Mode to the screen.

3.

Call the Enhanced Security to the screen.

4.

Touch [Storage Data Backup].

5.

Select [Generic format Backup] or [

OLI

 Format Backup].

6.

Touch [Enter Password], enter an encryption password using 1 to 32 characters, then touch [END].

7.

Touch [Start]. (“Processing” will be displayed.)
Touch [Cancel] if you want to stop the backup.

8.

After completing the backup, [Result OK] will be displayed.

9.

Turn OFF and ON the main power switch.

<Restore procedure>

1.

Connect the USB cable of an external HDD to the USB port of an MFP.

2.

Call the Service Mode to the screen.

3.

Call the Enhanced Security to the screen.

4.

Touch [Storage Data Backup].

5.

Select [Restore].

6.

Touch [Enter Password], enter a decryption password using 1 to 32 characters, then touch [END].

7.

Touch [Start]. (“Processing” will be displayed.)
Touch [Cancel] if you want to stop the restore.

8.

After completing the restore, [Result OK] will be displayed.

9.

Turn OFF and ON the main power switch.

2.12  Data Backup

2.12.1  Client Function

• To be used for moving data at the time of MFP replacement.
• Back up data saved in an MFP to the WebDAV server or an HDD.

(1)  Server Backup

Select Backup

• Select the backup method.

Setting item

Contents

Disable

Select not to use the backup.

Server Backup

Select to make backup to the server as backup.
Set “Setting when selecting backup to the server”.

Server Backup 2

Select to make backup to the server as backup 2.
Set “Setting when selecting backup 2 to the server”.

Setting when selecting backup to the server

<Backup setting>

• Set the backup setting.

NOTE

▪ This function cannot be enabled when Transmission protocol, SMB Setting or HTTP Setting, Backup target and Encryption

Password have not been set. 

Setting item

Contents

Setting value

Default

setting

Function Setting

To set whether to back up data to a server.

• When [ON] is selected, configure settings required for backup.

ON

Disable

○

Transmission protocol

To select a Transmission protocol.

SMB

HTTP

○

SMB
Setting

Host Name

To be set when “SMB” is selected for Transmission protocol.

Alphanumeric characters
and symbols up to 253
characters

-

File Path

255 characters maximum

User Name

64 characters maximum

Password

64 characters maximum

HTTP
Setting

URL

To be set when “HTTP” is selected for Transmission protocol.

Alphanumeric characters
and symbols up to 253
characters

-

User Name

64 characters maximum

Password

64 characters maximum

Proxy

ON/Disable

Backup target

To select a target to back up.
Items of (*) are displayed only when selected [Enable] in [Service
Mode] -> [System 2] -> [Maintenance Mode], and [Allow] in
[Administrator] -> [Security] -> [Security details] -> [Maintenance
Mode Access].

Remote Access Setting

-

User Settings

Service setting

Address Book (*)

Service Manual

Y119930-3

Summary of Contents for d-Color MF 4003

















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for d-Color MF 4003

Xerox 2006NPC - DocuColor Color Laser Getting Started preview
2006NPC - DocuColor Color Laser
Brand: Xerox Pages: 114

Brands by name

Popular brands

Load more brands