manualshive.com logo in svg

Olivetti d-Color MF 4003, Service Manual

The Olivetti d-Color MF 4003 is a high-quality, multifunctional printer that offers exceptional performance and reliability. To assist users in maximizing their experience, a comprehensive service manual is available for free download from our website. This manual provides detailed instructions and troubleshooting tips to ensure smooth operations.

Share
Download
background image

d-Color MF4003/MF3303

L TROUBLESHOOTING > 7. CS Remote Care ERROR CODE

L-88

Error code

Contents

Solution

000E

Receiving ring buffer full

• When receiving ring buffer is full

If the same error is detected several times, turn the
modem power OFF and ON.

000F

Transmission ring buffer full

• When transmission ring buffer is full

If the same error is detected several times, turn the
modem power OFF and ON.

0014

Incorrect transmission data length

• When transmission of a data with the length longer than the

transmission ring buffer size is requested

If the same error is detected several times, turn the
modem power OFF and ON.

0015

Status error (upon modem operation check)

Transmit again manually.

0016

Status error (upon data arrival)

Transmit again manually.

0017

Status error (upon line disconnection)

Transmit again manually.

0019

Center ID error

• Center ID of the host is not identical with the one of start request

telegram.

• Check center ID setting of the main body side.
• Check the setting condition of the host side.

001A

Device ID inconsistency

• Device ID of the main body is not identical with the one of start

request telegram.

• Check device ID setting of the main body side.
• Check the setting condition of the host side.

001B

Device ID unregistered

• Request telegram 2 (Constant data transmitting, emergency call)

comes from the main body that has not registered device ID yet.

• Check device ID setting of the main body side.
• Check the setting condition of the host side.

001C

Grammar error

• The specified format is not used in the received reply telegram.

Check the settings for CSRC application.

001D

Impossible to change (Item where change is prohibited)

• Host inquires change of the setting of the item not allowed to be

changed.

Check the settings for CSRC application.

001E

Impossible to change (during printing)

• Setting cannot be changed because the setting change is made

during the machine is printing or starts printing.

Try again when the machine is not printing.

001F

Impossible to change (Item where change is prohibited)

• Host attempts to write data to the item of which current value has

not been read.

Check the settings for CSRC application.

0020

Timeout of telegram delivery

• At waiting mode of telegram delivery the machine fails to receive

the telegram in a given time.

Try communication again.

0021

Telegram longer than the specified length.

• A telegram longer than the specified length is received.

Check the settings for CSRC application.

0022

Transmission phase response NG

Try communication again.

0023

Timeout of transmission phase response MSG

Try communication again.

0024

Incorrect acquisition function of event data

Try communication again.

0025

Timeout of driver transmission check MSG

Try communication again.

0026

An internal inconsistence is detected

Try communication again.

0027

Transmission / receiving collision

• Receiving is detecting during transmitting processing

Try communication again.

7.3.2  When connecting by e-mails

NOTE

▪ When a code other than the ones listed below is displayed, contact 

OLI

 and inform the error code.

(1)  0###

Error code

Contents

Solution

0###

Transmission error
###: SMTP responding code (hexadecimal)
For SMTP responding code, see RFC issued by IETF after converting
hexadecimal number into decimal one.

Check the user's SMTP server system settings.

• Authentication setting
• Authentication ID
• Authentication password
• Address of the destination where the server is

connected

(2)  1###

Error code

Contents

Solution

1030

Machine ID mismatching

• Received an e-mail which tells that machine ID mismatches.

• Check the machine ID setting.
• Check the machine ID setting on host side.

1050

Grammar error

• Received mail did not define the CS Remote Care command (2

digits).

• The Type of Subject and the command of attached file are not

consistent.

Ask the host to send another mail.

Service Manual

Y119930-3

Summary of Contents for d-Color MF 4003

















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for d-Color MF 4003

Minolta CF910 Operator'S Manual preview
CF910
Brand: Minolta Pages: 206
Olivetti d-Color MF25 User Manual preview
d-Color MF25
Brand: Olivetti Pages: 587
Xerox CopyCentre C2128 Reference Manual preview
CopyCentre C2128
Brand: Xerox Pages: 4

Brands by name

Popular brands

Load more brands