Olivetti d-Color MF 4003 Service Manual Download | Manualshive

Page: 639 / 688

background image

d-Color MF4003/MF3303

P THEORY OF OPERATION > 1.

d-Color MF4003/MF3303

P-65

Mode

State

Power key LED

(Reduce)

• When an original is placed on the scanner, a job is received, or the

machine is operated, the system wakes up.

Sleep mode
(*2)
(High)

• Power is supplied only to a portion of the base board required for

receiving a job.

• Reset when a job is received or the machine is operated.

Sub power
OFF mode

Sleep mode
(*3)
(Not reduce)

• Power consumption is reduced in low power mode.
• Sensors that are used internally are operating.
• Wake-up time is shorter than when “Enabled or High” is selected.
• The system wakes up when the sub power is turned on.

Lit up orange

Sleep mode
(*3)
(Reduce)

• Power is supplied only to a portion of the base board required for

receiving a job.

• A job can be received, but printing is performed when power is turned

ON.

• Wake-up time is longer than when “Disabled” is selected.

Sleep mode
(*3)
(High)

• Power is supplied only to the base board.
• A job can be received, but printing is performed when power is turned

ON.

• Wake-up time is longer than when “Disabled” is selected.
• Power is reduced when “Enabled” is selected.

ErP auto power off mode

• Power consumption to the lowest level.
• Reset only by the power key or the weekly timer setting.
• No jobs can be received. (*1)
• The system can also wake up when this machine is equipped with the

optional wireless LAN kit.

Blinking in orange

• *1: In ErP auto power OFF mode, this machine cannot receive data or faxes, and also it cannot scan or print an original.
• *2: [Disable], [Enabled] and [High] are selectable in [Administrator] -> [Maintenance] -> [Timer Setting] -> [Power Settings] -> [Power

Consumption in Sleep Mode].

• *3: Even in sub power off mode, [Disable], [Enabled] and [High] are selectable in [Administrator] -> [Maintenance] -> [Timer Setting] ->

[Power Supply/Power Save Settings] -> [Power Consumption in Sleep Mode].

(3) Power supply

Power is supplied only to the following portions in the sleep mode and the sub power OFF mode.

5.1 V

• MFP controller
• FAX CPU
• Main body storage (*1)
• USB board

• Angle sensor (*2)
• Original cover sensor (*2)
• Control panel key

• *1: When [Enabled] and [High] are selected in [Administrator] -> [Maintenance] -> [Timer Setting] -> [Power Settings] -> [Power

Consumption in Sleep Mode], the power is not supplied.

• *2: When [High] is selected in [Administrator] -> [Maintenance] -> [Timer Setting] -> [Power Settings] -> [Power Consumption in Sleep

Mode], the power is not supplied.

1.18 FAN CONTROL

1.18.1 Configuration

[2]

[3]

[4]

[1]

[1]

Toner suction fan (FM2)

[2]

Machine cooling fan (FM1)

[3]

CPU cooling fan (FM3)

[4]

DF cooling fan motor (FM4)

Y119930-3

Service Manual

«
...
637
638
639
640
641
...
»

Summary of Contents for d-Color MF 4003

















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for d-Color MF 4003

Brand: Olivetti Pages: 90

Brand: Epson Pages: 53

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands