manualshive.com logo in svg

Olivetti d-Color MF 4003, Service Manual

The Olivetti d-Color MF 4003 is a high-quality, multifunctional printer that offers exceptional performance and reliability. To assist users in maximizing their experience, a comprehensive service manual is available for free download from our website. This manual provides detailed instructions and troubleshooting tips to ensure smooth operations.

Share
Download
background image

d-Color MF4003/MF3303

H UTILITY MODE > 12. Supplementary explanation of utility mode

H-33

12. Supplementary explanation of utility mode

12.1  MAINTENANCE

12.1.1  License Settings

Get Request Code

• To display and print a request code and serial number used to activate i-Option.

<Procedure>

1.

Touch [Get Request Code], and [OK].

2.

A serial number and request code are issued.

3.

By touching [Print], the serial number and request code are printable.

Install License

• To allow administrator to activate functions provided by i-Option.
• The functions can be activated by entering Function/License Code or Token Code.
• By making settings in [Service Mode] -> [Billing Setting], CE can also activate functions provided by i-Option.

NOTE

▪ When activating i-Option, MFP accesses to 

OLI

 license server via WebDAV connection. Set the proxy server setting in

 

[Administrator] -> [Network] -> [WebDAV Settings] -> [Proxy Setting for Remote Access] as occasion demands.

▪ For accessing to 

OLI

 license server, it is necessary to select [Fixed Address] in [Service Mode] -> [Billing Setting] -> [WebDAV

 

Server Setting].

▪ When the server connection error “MAE001” is displayed, check the network settings.
▪ If an internal error “MAI001” is displayed, repair repair license management information through [Service Mode] -> [Billing

Setting].

<Procedure (Function/License Code)>

1.

Touch [Install License].

2.

Touch [Function/License Code].

3.

Touch [Function Code].

4.

Enter the Function Code.

5.

Touch [OK].

6.

Touch [License Code].

7.

Enter the license code that was issued in the license management server using the key board on the control panel, and touch [OK].

8.

Touch [Install].

9.

Confirm the message, select [Yes], and touch [OK].

10.

Turn OFF and ON the main power switch.

<Procedure (Token Code)>

1.

Touch [Token Code].

2.

Touch one of the Token Codes 1 to 10.

3.

Enter the Token Code.

4.

Touch [OK].

5.

Touch [Install].

6.

Confirm the message, select [Yes], and touch [OK].

7.

Turn OFF and ON the main power switch.

List of Enabled Functions

• To display currently activated functions.

12.1.2  External Memory Backup

NOTE

▪ It will be displayed when [Service Mode] -> [System 2] -> [Software Switch Setting] shows that switch No.72 is set to [00000100] at

Bit assignment/[04] at HEX assignment.

▪ In the following conditions, data export into the external memory is prohibited.

▪ [Administrator] -> [Security] -> [USB Connection Permission setting] is set to “Restrict.”
▪ [Administrator] -> [Security] -> [USB Connection Permission setting] -> [Detail Setting] -> [External Memory(Service)] is set

to “Restrict.”

▪ [Administrator] -> [Security] -> [Enhanced Security Mode] is set to “ON”.

Import

• To import various types of setting information from other machine via the USB memory.
• Types of data that can be imported:

• Address Book, Authentication Data, Network Settings, Remote Access Setting, User Setting, Administrator Setting, Custom Display

Settings, Cloud Connection Setting, External Certificate, Accessibility, Custom Auth. Setting, PKI Batch Setting

NOTE

▪ The size of the importable file is 700 KByte or less. However, the size of a Custom Auth. Setting data is 1 MByte or less.

<Procedure>

1.

Connect the external memory to the machine.

2.

Touch [Import].

3.

Touch [Password], enter the password previously set for the import data, and touch [OK].

4.

Touch [Start].

5.

Import results appear.

NOTE

▪ If an error occurs in importing an external certificate, the certificate is returned to the state before it is imported.
▪ Import errors of external certificates are determined in following cases:

▪ Importing a certificate fails.
▪ The number of imported certificates exceeds the limit.

Export

• To export various types of setting information to an external memory (USB memory).

Y119930-3

Service Manual

Summary of Contents for d-Color MF 4003

















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for d-Color MF 4003

Hitachi Koki DDC 52N User Manual preview
DDC 52N
Brand: Hitachi Koki Pages: 209
Hitachi DDC 35N Operator'S Manual preview
DDC 35N
Brand: Hitachi Pages: 176
Triumph Adler DCC 2520 Instruction Handbook Manual preview
DCC 2520
Brand: Triumph Adler Pages: 378
Q-Tec 760C Installation & User Manual preview
760C
Brand: Q-Tec Pages: 18
Olivetti d-COLOR MF552plus Service Manual preview
d-COLOR MF552plus
Brand: Olivetti Pages: 49
Xerox Copycentre C118 Software Manual preview
Copycentre C118
Brand: Xerox Pages: 47
Riso RP-255 Technical Manual preview
RP-255
Brand: Riso Pages: 449
Riso ME 6350 User Manual preview
ME 6350
Brand: Riso Pages: 306

Brands by name

Popular brands

Load more brands