manualshive.com logo in svg

Olivetti d-Color MF 4003, Service Manual

The Olivetti d-Color MF 4003 is a high-quality, multifunctional printer that offers exceptional performance and reliability. To assist users in maximizing their experience, a comprehensive service manual is available for free download from our website. This manual provides detailed instructions and troubleshooting tips to ensure smooth operations.

Share
Download
background image

d-Color MF4003/MF3303

I SERVICE MODE > 18. Machine Update Setting

I-125

18. Machine Update Setting

18.1  Internet ISW

18.1.1  Internet ISW Set

• To use when upgrading the firmware by Internet ISW.
• Each setting such as Server setting will be valid by setting this to “ON”.

NOTE

▪ If [Administrator] -> [Security] -> [Enhanced Security Mode] is set to “ON”, this setting will automatically be set to “OFF” and

cannot be changed.

Setting item

Description

Setting

Default setting

Function setting

To set whether or not to enable each setting for Internet ISW.

ON

OFF

○

Open Mode Settings

This setting is available when Function Setting is set to “Set.”
When “Set” is set, download and update of firmware by Internet ISW is enable by
administrator settings.

Set

Unset

○

18.1.2  HTTP Setting

To use when accessing the server using the HTTP protocol.

Setting item

Description

Setting

Default setting

HTTP data acquisition
setting

To set whether or not to enable downloading using the HTTP protocol.
When “ON” is set, set Connection Time-out.

ON

OFF

○

Connection Time-out

To set the time for the timeout for accessing the server.

30 to 300 sec.

60 sec.

18.1.3  FTP Setting

To use when accessing the server with FTP protocol.

Setting item

Description

Setting

Default setting

FTP data acquisition setting

To set whether or not to enable downloading using FTP protocol.

ON

○

OFF

Connectio
n Setting

Port Number

To set the port number.

1 to 65535

21

Connection
Timeout

To set the timeout time.

1 to 60 (Minute)

1 (Minute)

PASV Mode:

To set whether to enable or disable connection by the PASV (passive) mode
(FTP server side will inform the connection port before connecting).

ON

OFF

○

18.1.4  Forwarding Access Setting

Setting item

Description

Setting

User ID

To register the user ID for accessing the program server where firmware is to be stored.

Alphanumeric characters
and symbols (up to 64
characters)

Password

To register the password for accessing the program server where firmware is to be stored.

Alphanumeric characters
and symbols (up to 64
characters)

URL

To register the user ID for accessing the program server where firmware is to be stored.

• When connecting to http “http:// (Host name or IP address)/ directory name” or “https:// (Host

name or IP address)/directory name”.

• When connecting to ftp “ftp:// (Host name or IP address)/directory name”.

Alphanumeric characters
and symbols (up to 256
characters)

FileName

To register the file name of the firmware data to be downloaded.

Alphanumeric characters
and symbols (up to 63
characters)

<Procedure>

1.

Select a setting item.

2.

Enter information using the on-screen keyboard.

18.1.5  Download

NOTE

▪ To connect MFP to the Internet via a proxy, the proxy server related settings must be configured in addition to [Forwarding

Access Setting]. The settings of the proxy used in Internet ISW communications is configured in [Administrator] -> [Network] ->
[Machine Update Settings] -> [Internet ISW Settings] -> [FTP Server Setting] or [Administrator] -> [Network] -> [Machine Update
Settings] -> [HTTP Proxy Settings].

▪ If connection to the program server or data download fails, an error code and a message are displayed. Identify the cause of the

problem with the error code and reconfigure the settings following the message. Refer to “

 L.6 ERROR CODE FOR THE

INTERNET ISW

” for the error codes.

Download/Update

• Access the program server according to the Internet ISW setting, and download the firmware.
• To use when updating the firmware via network.

Y119930-3

Service Manual

Summary of Contents for d-Color MF 4003

















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for d-Color MF 4003

Ricoh FT 1008 Operator'S Manual preview
FT 1008
Brand: Ricoh Pages: 65
Minolta CF2001P User Manual preview
CF2001P
Brand: Minolta Pages: 121
Xerox 2006NPC - DocuColor Color Laser Getting Started preview
2006NPC - DocuColor Color Laser
Brand: Xerox Pages: 114
Canon iR1230 Service Bulletin preview
iR1230
Brand: Canon Pages: 2

Brands by name

Popular brands

Load more brands