Olivetti d-Color MF 4003 Service Manual Download | Manualshive

Page: 390 / 688

background image

d-Color MF4003/MF3303

K FIRMWARE > 2. USB memory

K-2

2. USB memory

2.1 Preparation

System preparation

• PC with USB ports
• USB memory

• USB flash memory compatible with the USB (1.1/2.0/3.0) interface. The speed is limited to USB2.0 specifications even if using a

device that supports USB3.0.

• The USB memory is formatted in FAT32 format.
• No security functions such as encryption and password lock have been added (or the USB memory allows its security functions to be

turned OFF).

• A USB memory that is recognized by the computer as two or more drives cannot be used.

NOTE

▪ Possible to be non-operational products.

USB memory used to update firmware

1.

Uncompress the firmware file.

2.

Connect the USB memory to the computer.

3.

Copy the extracted update data folder into the root directory of the USB memory.

Product name

Rewriting data folder name

d-Color MF4003/MF3303

FW0022

NOTE

▪ More than one firmware data with a single model can be stored in the USB memory.
▪ In this case, copy the firmware data to the USB memory according to the following procedures.

1. Make the folder named "FWSelect" (case-sensitive) to the root directory of the USB memory.
2. Make a folder with any folder name (one byte alphameric characters, maximum 40 characters) under "FWSelect" folder, and
store the firmware data to the folder.

Directory configuration of USB memory

FW****

FWSelect

Folder1

Folder2

Folder3

Firmware Data Ver.A

Firmware Data Ver.B

Firmware Data Ver.C

Firmware Data Ver.D

[1]

[2]

[3]

[4]

[5]

[6]

[1]

USB memory

[2]

Rewriting data folder (Required) *1

[3]

Storage folder for a plurality of data (Folder name:
FWSelect (Fixed)) *2

[4]

Storage folder for firmware data B (Folder name:
Arbitrary) *2

[5]

Storage folder for firmware data C (Folder name:
Arbitrary) *2

[6]

Storage folder for firmware data D (Folder name:
Arbitrary) *2

• *1: Required to start the firmware update screen.
• *2: Required only when a plurality of data is stored.

2.2 Rewriting of Firmware

Starting the update screen

NOTE

▪ When [Administrator] -> [Security] -> [USB Connection Permission setting] -> [External Memory (Service)] -> [FW Update] is set

to "Restrict", firmware update cannot be executed by using a USB memory.

▪ When the main power switch is turned on, a message "It is limited by the administrator." will appear.

▪ When [Administrator] -> [Security] -> [FW Update (USB) Perm. Sett.] is set to "Password Priority", it requires to input a password

after confirming with the administrator.

▪ USB memory must be connected with the main power switch off.

<Procedure>

1.

Turn OFF the main power switch.

Service Manual

Y119930-3

«
...
388
389
390
391
392
...
»

Summary of Contents for d-Color MF 4003

















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for d-Color MF 4003

Brand: Royal Copystar Pages: 602

Brand: Icy Box Pages: 25

Brand: Lanier Pages: 258

Brand: Olivetti Pages: 20

Wide Format 6204

Brand: Xerox Pages: 72

Brand: Triumph Adler Pages: 42

Brand: Triumph Adler Pages: 244

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands