background image

13. Slightly slide the drum unit (K) out and remove 

the protective tape.

14. Slide the drum unit (K) into the machine.
15. Lock the drum unit (K) with the lever.

VII. Installing the toner cartridge

Note:

Since cartridge is not furnished with the machine, 
purchase toner cartridge (of different colors) sepa-
rately.

1. Shake the toner cartridge up and down and left to 

right 5 to 10 times respectively.

Note:

Shake the cartridge adequately. Otherwise, it may 
cause trouble.

2. Insert the toner cartridge into the machine.

Note:

    • Make sure that the color is same between 

inserting port and the toner cartridge.

    • Make sure that the blue label position of the 

toner cartridge is matched with the one of the 
machine side.

3. Push the toner cartridge all the way in and rotate 

it clockwise to lock it.

Note:

Make sure that the toner cartridge is pushed all the 
way in.

4. Using the same procedure, install the toner car-

tridges for other colors of toner.

A0EDIXC019DA

A0EDIXC020DA

A0EDIXC021DA

A0EDIXC022DA

Installation Manual                                                          E-

6

                                                                      

Y111050-6

Summary of Contents for d-Color MF280
















Reviews: