Olivetti d-COLOR MF3300 Utility Keys Download

Page: 57 / 69

d-Color MF 3300/3800

5-25

5.8

[Fax Settings]

[Function Settings]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings]

Configure the settings for using various fax transmission and reception functions.

Settings

Description

[Function ON/OFF Set-
ting]

Enable or disable fax transmission and reception functions, such as Confirm
Address that prevents wrong fax transmission, F-Code TX, and Relay RX.

[F-Code TX]

Select whether or not to use F-Code TX.
This option is available for confidential transmission or relay request.
[ON] is specified by default.

[Dest. Check Dis-
play Func.]

Select whether or not to show a list of specified destinations before sending a
fax.
[OFF] is specified by default.

[Confirm Addr (TX)]

Select whether or not to require the user to enter a fax number twice to send
a fax by directly entering the fax number.
This is convenient to prevent a fax from being sent to an incorrect destination.
[OFF] is specified by default.

[Confirm Addr (Reg-
ister)]

Select whether or not to require the user enter a fax number twice to register
it when, for example, registering a destination or forwarding destination.
This is convenient to prevent the fax number from being incorrectly registered.
[ON] is specified by default.

[Restrict Fax TX]

Select whether or not to allow G3 fax transmission.
[Allow] is specified by default.

[Restrict Fax RX]

Select whether or not to allow G3 fax receiving.
[Allow] is specified by default.

[Restrict PC-Fax TX]

Select whether or not to allow PC-Fax TX using the fax driver.
[Allow] is specified by default.

[Restrict Internet
Fax TX]

Select whether or not to allow Internet fax transmission.
[Allow] is specified by default.

[Restrict Internet
Fax RX]

Select whether or not to allow Internet fax receiving.
[Allow] is specified by default.

[Memory RX Setting]

Select whether or not to use the Memory RX function.
When using the Memory RX function, enter the password to restrict accesses
to the Memory RX folder (using up to eight digits).
[OFF] is specified by default.

[Closed Network RX]

Select whether or not to use the Closed Network RX function.
When using the Closed Network RX function, enter the password to restrict
peers (using up to 4 digits). Inform the peer of the password you entered here.
[OFF] is specified by default.

[Forward TX Setting]

Configure the settings for using the Forward TX function.

[Enable Settings]

Select whether or not to use Forward TX.
[OFF] is specified by default.

[Forward Dest.]

Specify a destination where to forward a received fax.
Directly enter the fax number or display the address book, then select the de-
sired one from the destinations (fax destinations, E-mail destinations, and In-
ternet fax destinations) registered on this machine.

[Output Method]

Select whether or not to print a received fax on this machine when forwarding
it.
•

[Forward & Print]: A received fax is forwarded and printed on this machine.

•

[Forward & Print (If TX Fails)]: A received fax is forwarded and printed on
this machine.

[Forward & Print (If TX Fails)] is specified by default.

[PC-Fax RX Settings]

Configure the settings for using the PC-Fax RX function.

[Enable]

Select whether or not to use the PC-Fax RX function.
[Restrict] is specified by default.

[Print]

Select whether or not to print a received fax after it has been received.
[OFF] is specified by default.