FAX Operation (Advanced)
4-10
Manual Send
This method allows you to send originals by pressing the
Start
key after confirming that the telephone line has
connected to the receiving system. Connecting a telephone set (commercially available product) to this machine
enables you to talk with the person at the receiving system before sending originals.
Using after Confirming the Connection to the Receiving System
You can send originals after confirming that the telephone line has connected to the receiving system.
1
Press the
FAX
key.
2
Set the originals.
3
Press the
On Hook
key.
4
Use the numeric keys to enter the number of the
receiving system.
NOTE:
To cancel the operation, press
On Hook
key
or
Reset
key.
5
When you hear the fax tone, the telephone line has
connected to the receiving system. Press the
Start
key. Transmission begins.
NOTE:
When
On
is selected in
Destination Check
before Send
, a destination confirmation screen is
displayed when you press the
Start
key. For details,
refer to
Confirmation Screen of Destinations on
Using a Telephone to Send
When you want to talk to the person at the receiving system or the receiving system needs to switch to fax, use
this method to send originals.
1
Set the originals.
2
Lift the handset, and dial the number of the
receiving system.
3
Check if the telephone line has connected to the
fax of the receiving system.
When you hear the fax tone
The receiving system is on fax.
1
Press the
FAX
key.
2
Press the
On Hook
key.
3
Press the
Start
key. Transmission begins.
Summary of Contents for d-COLORMF2604
