background image

10-14

Appendix > Received FAX Sizes and Paper Priority (Inch Model)

Received FAX Sizes and Paper Priority (Inch Model)

When no paper loaded in the cassettes matches the received fax size and orientation, the machine automatically 
chooses the printing paper according to the following priority.

Received FAX Size

Priority

Statement

Letter

Legal

Letter 

Long Originals

*

*

Letter Long Originals: Originals longer than Letter in the direction of the paper feed.

Legal 

Long 

Originals

**

** Legal Long Originals: Originals longer than Legal in the direction of the paper feed.

Paper Size

1

Statement***

*** Paper orientation is different from the received document. The image is printed after being rotated 90°automatically.

Letter

Legal

Letter

Legal

2

Letter

Legal

Letter

Letter****

**** Images longer than the Legal length (14 inches) are received and printed on Letter paper without dividing them.

 : indicates print output on two sheets.

3

Legal

Letter

Letter

NOTE

When a paper type is selected in 

Media Type

, a received fax is printed using the matching paper source. 

Media Type for Print Output (page 4-7)

If [

All Media Types

] is selected, a paper type cannot be specified for fax printouts.

Summary of Contents for d-COLORMF3023































































































































































































Reviews: