2-7
Before Using the Fax Machine > Quick Setup Wizard (Fax Setup)
Quick Setup Wizard (Fax Setup)
In quick setup mode, a wizard is used to configure the following settings. Be sure to complete the settings before using
the fax system.
Fax setup items
Step
Setting item
Description
Reference
Page
1.Dialing/RX Mode
Dialing Mode
Select the dialing mode according to the line type.
Reception Mode
Select the reception mode.
Auto (DRD)
Select the reception pattern.
2.Local Fax Info.
Local FAX Name
Register the local fax name printed on the fax on the receiving
system.
Local FAX Number
Enter the local fax number to be printed on the fax on the
receiving system.
Local FAX ID
Enter the local fax ID. The local fax ID can limit other parties
with which you can communicate. Enter the four-digit local
FAX ID number.
TTI
Select whether or not to print the local fax information on the
fax on the receiving system.
3.Sound
Speaker Volume
Set the volume when selecting [
On Hook
].
Speaker Volume: Volume of the built-in speaker when the line
is connected by selecting [
On Hook
].
Monitor Volume
Set the monitor volume.
Monitor Volume: Volume of the built-in speaker when the line is
connected without selecting [
On Hook
] such as in memory
transmission.
Job Finish Buzzer
Emit a sound when a print job is normally completed.
4.Rings
Normal
Set number of times to let phone ring before answering a call.
Answering Machine
Set number of times to let phone ring before taking over from
the answering machine.
FAX/TEL Switch
Set number of times to let phone ring before switching the FAX
and the phone.
5.Redial
Retry Times
Set the number of redials.
NOTE
The settings can be changed in the system menu.
Summary of Contents for d-COLORMF3023
Page 1: ...Code 597300en d COLORMF3024 FAX OPERATION GUIDE...
Page 190: ......
