E-10
(5) Attach the supplied duct cover. (Two supplied
screws B)
Tab
11. Connecting the power cord
(1) Connect the connector of the power cord to the
main body.
WARNING
Use the appropriate power cord.
Failure to do this could result in a fire or
electrical shock.
(2) Fit the supplied cable clamp over the power
cord. (One supplied screw C)
(3) Plug the power cord into the power outlet.
12. Starting the machine
Open the power switch cover on the right side of the
main body, and turn ON the main power switch.
13. Date & Time Setting/Time Zone Setting
(Service Mode)
(1) Display the Service Mode screen. (For details
of how to display the Service Mode screen, see
the service manual.)
(2) Display the Date & Time Setting/Time Zone
Setting screen. (To display the Date & Time
Setting/Time Zone Setting screen, press Stop
→ 3 on the control panel.)
(3) Do not input date and time but touch “Entry” of
the Date & Time Setting.
(4) Input the time zone using up/down keys or di-
rect keys.
(5) Touch “Entry” of the Time Zone Setting.
(6) Touch “Apply.”
(7) Touch “OK.”
(8) Touch “Next.”
14. Serial number input
Note:
Serial number input is needed only for the op-
tional devices that have been or will be installed.
(1) Touch the item you want to enter and input the
serial number.
(2) Touch “END.”
(3) For other devices, enter their serial number in
the same way.
(4) Touch “END.”
(5) Touch “Next.”
Installation Manual
Y119820-3
