Y101700-5
Service Manual
9-1
9. USER PROGRAM
The conditions of factory settings can be changed according to the use conditions.
9.1 Functions that can be set with the user program
Function
Contents
Factory Setting
Auto clear time
When a certain time is passed after the completion of copying, this
60 sec
function returns to the initial state automatically. The time to reach
the initial state can be set in the range of 30 sec to 120 sec by the
unit of 30 sec. This function can be disabled.
Preheat
When the copier is left unused with the power ON, the power
30 sec
consumption is automatically reduced to about 40Wh/H (* Note).
The time to start this function can be set in the range of 30 sec to
90 sec by the unit of 30 sec. This function cannot be disabled.
When this function is operated, the pre-heat lamp on the operation panel
lights up. To return to the initial state, press any key on the operation panel.
(When the COPY button is pressed, a copy is made after returning to the
initial state.)
Auto shut off
When the copier is left unused with the power ON, the power consumption
5 min
timer
is automatically reduced to about 18Wh/H (* Note). The time to start this
function can be set in the range of 2 min to 120 min.
When this function is operated, all the lamps except for the pre-heat lamp
on the operation panel turn off. To return to the initial state, press the
COPY button.
Auto shut off
Used to set or cancel this function
Set
* Note:
The power consumption values in preheat and auto shut off may be varied depending on the use conditions.
9.2 Setting the Power Save Modes and Auto Clear Time
1) Press and hold down the light (
{
) and dark ( ) keys simultaneously for more than 5 seconds until all the
alarm indicators (
q
,
t
,
s
and
p
) blink and “- -” appears in the display.
2) Use the left copy quantity (
) key to select a user program number (1: auto clear time, 2: preheat mode, 3: auto
power shut-off timer, 5: auto power shut-off mode). The selected number will blink in the left side
of the display.
Function name
Function code
Auto clear time
1
Preheat
2
Auto shut off timer
3
Auto shut off
5
Note:
If a wrong code is entered press the clear key and enter the correct function code.
