9-2
Service Manual
Y101700-5
3) Press the Print (
) key. The entered program number will be steadily lit and the currently selected parameter
number for the program will blink on the right side of the display.
4) Select the desired parameter using the right copy quantity (
) key. The entered parameter will blink on the
right of the display.
Function
Set code
Function
Set code
Function
Set code
Funtion
Set code
Name
Name
Name
Name
0 (Cancel)
*0 (30 sec)
0 (2 min)
0 (Cancel)
1 (30 sec)
1 (60 sec)
*1 (5 min)
*1 (Setting)
Auto clear *2 (60 sec)
Preheat
2 (90 sec)
Auto shut
2 (15 min)
Auto shut
time
3 (90 sec)
off timer
3 (30 min)
off
4 (120 sec)
4 (60 min)
5 (10 sec)
5 (120 min)
*: Factory setting
5)
Press the print (
) key. The right-hand number in the display will be steadily lit and the entered value will be
stored.
Note:
To change the setting or to set another mode, press the Clear (
>
) key. The copier will return to step 2).
6)
Press the light (
{
) or dark ( ) key to return to the normal copy mode.
