GB-8
GB
5. Set the number of copies using the two copy quantity
(
,
) keys.
•
Press the clear (
>
) key to clear an entry if a
mistake is made.
•
A single copy can be made with the initial
setting, i.e., when “0” is displayed.
•
Press the right copy quantity key to set the unit digit
from 0 to 9. This key will not change the tens digit.
•
Press the left copy quantity key to set the tens digit
from 1 to 9.
6. Press the print (
) key.
To display the number of copies made in a continuous
run, press the left copy quantity key.
To stop copying in the middle of a run, press the clear
(
>
) key. Copying will stop and the number in the
display will be reset to “0”.
Setting a large original
The original cover can be removed to allow copying of
bulky objects.
1. Simply lift the original cover straight up.
2. To reattach the original cover, reverse the above proce-
dure.
EXPOSURE ADJUSTMENT/
PHOTO COPYING
Copy density adjustment is not required for most origi-
nals in the automatic exposure mode.
To adjust the copy density manually or to copy photo-
graphs, the exposure level can be adjusted in five steps
manually.
1. Set the original and check the copy paper size.
2. Press the exposure mode selector key to select the
manual (
=
) or Photo (
) mode.
3. Use the light (
{
) and dark (
)
keys to adjust the
exposure level.
If exposure level 2 is selected, the two left-handmost
indicators for that level will light up simultaneously.
Also, if level 4 is selected, the two right-handmost
indicators for that level will light up simultaneously.
4. Set the number of copies using the copy quantity
( , ) keys and press the print (
) key.
Tens digit
Unit digit
Summary of Contents for d-Copia 12
Page 165: ......
Page 166: ...Cod 506557 U ...
