background image

74

6. Limited Warranty on Media.

OLIVETTI warrants the disks on which the Software is recorded to be free from defects in materials and 
workmanship under normal use for a period of ninety (90) days from the date of purchase as evidenced 
by a copy of the receipt.  The entire liability of OLIVETTI and/or its Licensors and your exclusive 
remedy will be replacement of the disk which fails to meet the limited warranty provided by this Clause 
6.  A disk will be replaced when it is returned to OLIVETTI or a OLIVETTI authorized representative 
with a copy of the receipt.  OLIVETTI will have no responsibility to replace a disk damaged by accident, 
abuse or misapplication.

ANY IMPLIED WARRANTIES ON THE DISKS, INCLUDING THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN 
DURATION TO NINETY (90) DAYS FROM THE DATE OF DELIVERY.  THIS WARRANTY GIVES 
YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY 
FROM JURISDICTION TO JURISDICTION. 

7. Disclaimer of Warranty on Software.

You expressly acknowledge and agree that use of the Software is at your sole risk.  The software and 
related documentation are provided "AS IS" and without warranty of any kind and OLIVETTI and 
OLIVETTI'S Licensor(s) (for the purpose of provisions 7 and 8, OLIVETTI and OLIVETTI'S 
Licensor(s) shall be collectively referred to as "OLIVETTI") EXPRESSLY DISCLAIM ALL 
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  
OLIVETTI DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE 
WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THE SOFTWARE WILL 
BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE 
CORRECTED.  FURTHERMORE, OLIVETTI DOES NOT WARRANT OR MAKE ANY 
REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE 
SOFTWARE OR RELATED DOCUMENTATION IN TERMS OF THEIR CORRECTNESS, 
ACCURACY, RELIABILITY, OR OTHERWISE.  NO ORAL OR WRITTEN INFORMATION OR 
ADVICE GIVEN BY OLIVETTI OR A OLIVETTI AUTHORIZED REPRESENTATIVE SHALL 
CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.  
SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU (AND NOT OLIVETTI OR A OLIVETTI 
AUTHORIZED REPRESENTATIVE) ASSUME THE ENTIRE COST OF ALL NECESSARY 
SERVICING, REPAIR OR CORRECTION, SOME JURISDICTIONS DO NOT ALLOW THE 
EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO 
YOU.

8. Limitation of Liability.

UNDER NO CIRCUMSTANCES INCLUDING NEGLIGENCE, SHALL OLIVETTI BE LIABLE FOR 
ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES THAT RESULT FROM THE 
USE OR INABILITY TO USE THE SOFTWARE OR RELATED DOCUMENTATION, EVEN IF 
OLIVETTI OR A OLIVETTI AUTHORIZED REPRESENTATIVE HAS BEEN ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGES.  SOME JURISDICTIONS DO NOT ALLOW THE 
LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL 
DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
In no event shall OLIVETTI'S total liability to you for all damages, losses, and causes of action (whether 
in contract, tort (including negligence) or otherwise) exceed the amount paid by you for the Software.

9. Controlling Law and Severability.

For a portion of the Software related with Apple Macintosh and Microsoft Windows, this license shall be governed 
by and construed in accordance with the laws of the state of California and Washington, respectively.  If for any 
reason a court of competent jurisdiction finds any provision of this License, or portion thereof, to be unenforceable, 
that provision of the License shall be enforced to the maximum extent permissible so as to effect the intent of the 
parties, and the remainder of this License shall continue in full force and effect.

10. Complete Agreement.

This License constitutes the entire agreement between the parties with respect to the use of the Software and 
related documentation, and supersedes all prior or contemporaneous understandings or agreements, written 
or oral, regarding such subject matter.  No amendment to or modification of this License will be binding 
unless in writing and signed by a duly authorized representative of OLIVETTI.

Summary of Contents for d-Copia 150















































































Reviews: