2KL/2KK
1-4-12
(14)
A paper jam in the
paper conveying sec-
tion is indicated dur-
ing copying (misfeed
in registration/trans-
fer section).
Jam code 30
Deformed guides along the
paper conveying path.
Check visually and replace.
Broken registration switch,
cassette feed switch 1 or
duplex paper conveying
switch actuator.
Check visually and replace switch.
Defective switch.
Run maintenance item U031 and turn switch on and off manually.
Replace the switch if indication of the corresponding switch is not
light.
Registration switch, cassette feed switch 1, duplex paper convey-
ing switch
(15)
A paper jam in the
fuser section is indi-
cated during copying
(misfeed in fuser sec-
tion).
Jam codes 40, 41,
42, 43, 44 and 45
Check if the front fuser
guide is deformed.
Check visually and replace.
Check if the press roller is
extremely dirty or
deformed.
Clean or replace if necessary.
Check if the heat roller sep-
aration claws are dirty or
deformed.
Clean or replace if necessary.
Check if the heat roller and
its separation claws contact
each other.
Check visually and replace.
Broken eject switch or feed-
shift switch actuator.
Check visually and replace switch.
Defective switch.
Run maintenance item U031 and turn switch on and off manually.
Replace the switch if indication of the corresponding switch is not
light.
Eject switch, feedshift switch
Check if the registration
clutch malfunctions.
Run maintenance item U032 and select the registration clutch to
be turned on and off. Check the status and remedy if necessary.
Electrical problem with the
registration clutch.
Check (see page 1-4-28).
(16)
A paper jam in the
eject section is indi-
cated during copying
(misfeed in eject sec-
tion).
Jam code 50
Broken eject switch or reg-
istration switch actuator.
Check visually and replace switch.
Defective switch.
Run maintenance item U031 and turn switch on and off manually.
Replace the switch if indication of the corresponding switch is not
light.
Eject switch, registration switch
Check if the registration
clutch malfunctions.
Run maintenance item U032 and select the registration clutch to
be turned on and off. Check the status and remedy if necessary.
Electrical problem with the
registration clutch.
Check (see page 1-4-28).
Problem
Causes/check procedures
Corrective measures
Service Manual Y110980-1
Summary of Contents for d-Copia 1800
