Set-up
2-4
8
In the same manner, set
Subnet
for subnet mask and
Gateway
for gateway addresses.
9
Once it is complete to enter all network addresses and
returned to the Scanner setting screen of Step 7, use
the
S
and
T
keys to move
D
to select
End
and then
press the
Enter
key.
Note
In a network environment with RARP, select
RARP
and then select
On
on the Scanner setting
screen. In this case, you will not need to set the IP address manually.
10
For other network settings, use a web browser or Address Editor.
User registration
To use the scanner, user registration is needed in addition to the network setting. User (transmitter)
registration is performed from a web browser or Address Editor. For details, see the Online Manual
<Functions Edition>.
Date/Time and Time Difference
Sets the required area information for the Send E-mail function. The time of day when email is sent
from the scanner is included in the header of that email message as the transmission time. Perform
the following procedure in order to set the date and time in your area, as well as the time difference
to GMT (Greenwich Mean Time).
1
Press the
System Menu/Counter
key.
2
Use the
S
and
T
keys to move
D
to select
Machine
Default
and press the
Enter
key.
The password
entry screen will appear.
3
Enter the four-digit management code
using the
numeric keys. The management code at the factory
default setting is
1800
for the
18
ppm model
and
2200
for th
e 22 ppm model.
4
Use the
S
and
T
keys to move
D
to
select
Date/Time
and press the
Enter
key.
5
Use the
S
and
T
keys to move
D
to
select the item to
be changed and use the
<
and
>
keys to select the
desired setting.
IP Address
Subnet
Scan Default:
Gateway
10. 181. 15. 11
255.255. 0
:
:
:
255.
10. 181. 13. 11
End
IP Address
Scan Default:
Subnet
181. 15. 11
:
:
10.
255. 255.255. 0
Job Accounting
Copy Default
System Menu / Counter
Machine Default
Enter Pin Code using # key.
Low Power Time
Key Sound On/Off
Machine Default
Date/Time
15
On
09:35
:
Min.
:
:
End
Time
Date/Time
DST
: 09:35
Off
:
Summary of Contents for d-Copia 1800MF
