Setup
NETWORK SCANNER SETUP GUIDE
11
Enabling SMB Function
The SMB function enables scanned images to be stored as individual files in a folder
on your PC.
The SMB parameters can be set through the COMMAND CENTER.
The following information about each server needs to be registered on this machine.
•
Login user name (using operation panel)
•
Password (using operation panel)
•
Host name or IP address of the PC
•
Port number
•
Path (path from the home directory of the PC to the folder for storage)
•
Shares the destination's PC folder
Login username and Login password are identical to the Windows User logon on the
PC from which the accessed folder is stored. User access rights for the machine to
the necessary folder should be registered within Windows on that PC.
Scanner > SMB page
The table below lists the settings displayed on the scanner SMB page.
Item
Description
SMB Protocol
Switches the SMB Protocol on or off.
SMB Port Number
You can enter the port number to be used by SMB.