NETWORK SCANNER SETUP GUIDE
3
2
Setup
Date and Time Settings
Setting the Time Zone
You can also make this setting using the COMMAND CENTER. For details on
COMMAND CENTER, refer to
Accessing COMMAND CENTER on page 7.
1
Access
Time Zone
.
2
Press
S
or
T
to select the time zone that you are in.
3
Press
Enter
. The message display shows
Completed
and returns to the
Date/
Timer Set.
screen.
4
Enable Summer Time if needed - refer to
Summer Time Setting on page 3.
Summer Time Setting
Follow these instructions to turn the summer (daylight saving) time setting on and off.
NOTE:
This setting is valid only in areas where summer time is observed.
1
Press
S
or
T
to select
Summer Time
.
2
Press
Enter
.
3
Press
S
or
T
to select either
On
or
Off
.
4
Press
Enter
. The message display shows
Completed
and returns to the
Date/
Timer Set.
screen.
5
Enter the Date and Time - refer to
Setting the Current Date and Time on page
System Menu/
Counter
S
or
T
Date/Timer Set
Enter
S
or
T
Time Zone
Enter
