Basic Operation
3-17
Low-Power Mode
To activate Low-Power mode, press the
Energy Saver
key.
On the operation panel, only the
Energy Saver
,
Power
, and main power
indicators will remain lit.
To resume copying, perform one of the following actions. The machine
returns to a copy-ready condition.
•
Press any key on the operation panel.
•
Open the original cover or the optional document processor.
•
Place originals in the optional document processor.
The machine will resume copy functionality in 10 seconds.
If you are using the optional printer function or fax function and print data
or a fax arrives while the machine is in Low-Power mode, the machine
automatically wakes up and starts printing.
Auto Low-Power Mode
In Auto Low-Power mode, the machine automatically switches to Low-
Power mode if left idle for a preset period. The default period for Auto
Low-Power mode is 1 minute.
Sleep Mode
To activate Sleep mode, press the
Power
key.
On the operation panel, only the Main Power indicator will remain lit. The
machine will use much less power than Low-Power mode.
To resume copying, press the
Power
key again. The machine will
resume copy functionality in 15 seconds.
If you are using the optional printer function or fax function and print data
or a fax arrives while the machine is in Sleep mode, the machine
automatically starts printing without illuminating the operation panel.
Auto Sleep Mode
In Auto Sleep mode, the machine automatically switches to Sleep mode
if left idle for a preset period. The default period for Auto Sleep mode is
9 minutes.
Summary of Contents for d-Copia 2500
Page 1: ...d Copia 2500 d Copia 3000 Cod 541503en GB...
Page 60: ...3 18 Basic Operation...
Page 100: ...6 20 Troubleshooting...
Page 114: ...Index 4...
