56
APPLICABLE COPY MODES
5. The read-in starting screen will appear.
* The auto magnification selection mode has been set for the initial mode. When
setting the custom paper size or the custom zoom ratio, touch the manual key until
"1:1" is displayed on the zoom ratio display.
* When changing the zoom ratio, touch the "+" key or "-" key on the right side of the
zoom ratio display. When setting the zoom mode, such as standard zoom or XY zoom,
touch the "ZOOM" key and follow the instruction on page 19 and after.
* The setting of the zoom mode can be changed by each job.
* When setting the border erase mode, touch the "+" key or "-" key on the right side of
the display of the width of erasing border to set the width of erasing border. The width
can be selected from 6, 12 and 18 mm.
* The border erase mode in this setting is effective only for the sheet originals.
* The setting of the border erase mode can be changed by each job.
* If the "FUNCTION" key is touched, the following copy functions can be set.
• Margin mode: Touch the "MARGIN" key and follow step 4 and after on page 25.
• Merge copy: Touch the "MERGE COPY" key and follow step 3 and after on page 38.
• Page number printing: Touch the "PAGE #" key and follow step 4 and after on
page 26.
6. Set the original(s).
* The originals can be set within the one job is limited to the originals selected in step
4, and the one type of originals. If the type of original is changed, it must be stored in
memory in another job.
7. Press the Start key.
Summary of Contents for d-Copia 52
Page 1: ...42 52 COPIER OPERATION MANUAL Cod 506509D...
Page 11: ...7 NAMES OF PARTS...
Page 110: ......
