Olivetti d-COPIA3003MF Operation Manual Download

Page: 365 / 440

10-16

Troubleshooting

Remove the drum unit from the machine by holding the
green levers with both hands.

CAUTION:

The fuser unit inside the machine is hot. Do not

touch it, as it may result in burn injury.

NOTE:

The drum is sensitive to light. Never expose the

drum unit to light for more than five minutes.

If the jammed paper appears to be pinched by rollers,
pull it along the normal running direction of the paper.

Return the drum unit to its position, aligning the guides at
both ends with the slots in the machine.

Insert the developer unit together with the toner
container, back into the machine. Close the front cover.
The machine warms up and resumes printing.

Summary of Contents for d-COPIA3003MF

























































































































































































































































































































































































































































Search results

Summary of Contents for d-COPIA3003MF

Reviews:

Related manuals for d-COPIA3003MF

Brands by name

Popular brands

Olivetti d-COPIA3003MF, Operation Manual

Search results

Summary of Contents for d-COPIA3003MF

Reviews:

Related manuals for d-COPIA3003MF

Brands by name

Popular brands