Olivetti d-COPIA3003MF Operation Manual Download

Page: 94 / 440

3-5

Basic Operation

ID Card Copy

The procedure for using ID Card copying is explained below.

Press the

Copy

key when the

Copy

key/indicator is off.

NOTE:

If the Message Display is turned off, press the any

key on the operation panel and wait for the machine to warm
up.

Place the original on the platen.

Put the scanning side facedown in the center of
Statement or A5 size scanning area.

NOTE:

For loading instructions, refer to

Loading

Originals on page 2-52

Press the

Program 1

The ID Card Copy function is recalled.

Press the

Start

key. Scanning begins.

Turn over the original on the platen and press the

Start

key.

After scanning all originals, press [End Scan] (the

Right

Select

key) to start copying.

Recalled.

Program 1

Summary of Contents for d-COPIA3003MF

























































































































































































































































































































































































































































Search results

Summary of Contents for d-COPIA3003MF

Reviews:

Related manuals for d-COPIA3003MF

Brands by name

Popular brands

Olivetti d-COPIA3003MF, Operation Manual

Search results

Summary of Contents for d-COPIA3003MF

Reviews:

Related manuals for d-COPIA3003MF

Brands by name

Popular brands