50
ENGLISH
Applying Pr
Applying Pr
Applying Pr
Applying Pr
Applying Programmed and Random P
ogrammed and Random P
ogrammed and Random P
ogrammed and Random P
ogrammed and Random Per
er
er
er
ercent Plus
cent Plus
cent Plus
cent Plus
cent Plus
Ra
Ra
Ra
Ra
Rates to Individual Items
tes to Individual Items
tes to Individual Items
tes to Individual Items
tes to Individual Items
Example: Register a £2.50 item to Department 1, apply the pro-
grammed percent plus rate to a £3.50 item to Department 25, and apply
a random precent plus rate of 5% to a £5.00 item to Department 2.
Compute change tender.
Proceed as follows:
1. Type [250] and press the [Department 1/21] key.
2. Type [350] and press the [Dept Shift] key followed by the
[Department 5/25] key.
3. Press the [+%/PO] key to apply the programmed percent plus rate.
The amount added on is displayed.
4. Type [500] and press the [Department 2/22] key.
5. Type the random percent plus rate [5] and press the [+%/PO] key.
The amount added on is displayed.
6. Press the [Subtotal w/Tax] key to display the current balance due.
Adding a P
Adding a P
Adding a P
Adding a P
Adding a Per
er
er
er
ercent Plus Ra
cent Plus Ra
cent Plus Ra
cent Plus Ra
cent Plus Rate to Individual Items Using
te to Individual Items Using
te to Individual Items Using
te to Individual Items Using
te to Individual Items Using
the Pr
the Pr
the Pr
the Pr
the Programme
ogramme
ogramme
ogramme
ogrammed Ra
d Ra
d Ra
d Ra
d Rate
te
te
te
te
Up to four digits can be used for the percent plus rate (0-99.99%).
You MUST enter two digits after the decimal position.
Example: Register a programmed 3% percent plus rate on a £3.00 item
to Department 5, and a £2.50 item to Department 4. Compute the
change tender.
Proceed as follows:
1. Type [300] and press the [Department 5/25] key.
2. Press the [+%/PO] key to apply the programmed percent plus rate.
The amount added on is displayed.
3. Type [250] and press the [Department 4/24] key.
4. Press the [Subtotal w/Tax] key to display the current balance due.
5. Type the amount tendered [600] and press the [Amt Tend/TOTAL]
key. The change due to the customer is displayed and the transaction
ends successfully.
Amount added on
Programmed percent plus
rate