GB-2
USING THIS MANUAL
Your cash register Clerk Guide is organized for easy reference. The front portion gives an overall view of the
cash register and provides information on all the features and functions available. Next you will find transaction
examples showing you how to operate the cash register. Transaction examples provide steps for key operations
and include sample receipts. At the back of the manual you will find your cash register's technical specifications
and some safety information. Use the Table of Contents to locate a particular item.
Getting Started
Before you begin to use the cash register, read the sections entitled Keypad Functions, The Control System and
Operator and Customer Displays to become familiar with their operations.
Once the desired program options have been set by your Supervisor, insert the REG control key into the control
lock, turn it to the REG 1 or REG 2 position and you are ready to perform sales transactions. In the REG 2 position
the cash register will not print the customer receipt unless the
[ST]
key is pressed at the end of the transaction.
MAINTAINING THE CASH REGISTER
Provided below is information on how to maintain your cash register.
NOTE:
Before cleaning the cash register, make sure it is powered off and/or unplugged from the wall outlet.
Machine programming data and transaction information for management reports are stored in the cash
register. A back-up battery inside the cash register saves this information when the cash register is
unplugged from the power outlet or the event of a power failure.
1. Keep all liquids away from the cash register so as to avoid spills which could damage the electronic
components.
2. To clean the cash register firstly turn it off and/or unplug it from the wall outlet, then use just a damp cloth.
Do not use corrosive substances such as solvents, alcohol, petrol, or abrasive components.
3.
If the cash register is stored in extreme hot or cold temperatures (below 32 degrees or above 104 degrees
Fahrenheit), allow the temperature inside the cash register to reach room temperature before turning it on.
4. DO NOT attempt to pull the paper tape when the cash register is printing or when you are loading paper. Always
use the
[R Feed]
or
[J Feed]
key to feed paper. Pulling the paper tape could damage the print mechanism.
Summary of Contents for ECR 3550 T euro
Page 46: ...Code 506574 V...
