1
At first starting of the system, the display shows
:
SYSTEM INITIALIZATION
Pressing [CLEAR] the display shows:
LANGUE :FRANÇAIS
Press [TOTAL] to confirm the French Language or press the right arrow to
choose the English Language and press [TOTAL] to confirm it.
The display shows:
Entry of the date
(DD)-(MM)-(YY) [TOTAL]
Entry of the time
(HH)-(MM)
[TOTAL]
Entry of the ECR serial number (14 alphanumeric digits max) and confirm pressing [TOTAL].
Entry of the SIRET number (14 alphanumeric digits max) and confirm pressing [TOTAL].
Entry of the NAF number (5 alphanumeric digits max) and confirm pressing [TOTAL].
Entry of VAT number (13 alphanumeric digits max) and confirm pressing [TOTAL].
NOTE:
You can clear the character by the "C" key in the middle of entry. And you can go back
to previous item by the "C" key
in the case of empty field (no entries)
.
The cash register is set with the values you have programmed.
APPUYEZ SUR [CLEAR]
POUR SELECTION CLAVIER
ENGLISH
Here you can see:
- The choice of maximum number of PLUs that can be stored on the cash register
- The indication that all the Journal data, the internal memory of the cash register and settings
are stored on the mass storage (SD) you have inserted in the machine
- The maximum number of tables that can be tracked simultaneously
Choose one of these two combinations:
• 1500 PLU, max. 70 tables
• 2000 PLU numbers, no table tracking.
Press the right arrow until the display shows the desired combination and then press [TOTAL].
Press the down arrow going on the message: “Êtes-vous sûr ??” (In English: “Are you sure ??”).
Press the right arrow to show OUI (In English: YES), then press [TOTAL].
PLU/JE/TBL :1500/SD/70
