3.3.8
Removal of the motherboard
Before removing the control board, the inverter board must be disassembled as described above.
To remove the control board, proceed as follows:
•
Disconnect the connector of the on/off led
A
and the five-pin cable of the touch screen
B
.
•
Remove the five lock screws
C
, hex screws
D
that fasten the COM ports and remove the cover
E.
•
After removing the cover, disconnect connectors
F
and remove lock screws
G
of the board.
C
A
B
Figure 3-20
D
A
Figure 3-21
XZAC3272 Service
Manual
3-11
Summary of Contents for Explor 200M
