3 9
6.
To confirm your choice, press the key:
7.
To return the fax machine to its initial stand-by mode,
press the key:
n o t e
If you have confirmed the option "SILENT RX: DAILY", the
fax machine will prompt you to enter the time at which it is to
start and end silent reception. Once you have set the time,
press the
key to confirm.
n o t e
The daily silent reception setting ("SILENT RX: DAILY") is
cancelled by a power failure
.
T
O
DISPLAY
THE
CALLER
ID
This function, which may be activated by the telephone
company on request by the user,
is only available in
some countries
and
conforms
to the
ETSI ETS 300
778-1 standard
.
This function
tells you immediately who is calling
.
In this way, you will be able to decide whether to an-
swer the call or not.
When this function is enabled, if the fax machine is in
stand-by mode
, whenever a call is received, it
al-
ways shows one of the following items of infor-
mation
:
•
number or name of the correspondent
who called
you;
•
PRIVATE
: if the correspondent has chosen not to re-
veal his identity to you;
•
NOT AVAILABLE
: if the correspondent is connected to
a telephone exchange that does not support this serv-
ice.
If you are
programming
your fax machine and, when
an incoming call is received, want to
know who is
calling you
,
you must press
the
key before
answering the call.
It may however happen, if you are connected to a par-
ticular kind of telephone network, that the number of the
caller is not displayed on the fax machine. If this hap-
pens, call your local customer engineering service cen-
tre.
The fax machine is
already set up
to
display the
caller ID
. You may however set it up not to display it, as
follows:
1.
Press the key
until the display shows:
INSTALLATION
2.
Press the key:
The display shows:
TEL. LINE SETU-UP
3.
Press the key:
The display shows:
ENHANCED FEATUR.
4.
Press the key
until the display shows:
CALLER ID: ON
5.
To view the other available option, "CALLER ID: OFF",
press the keys:
|
/
}
6.
To confirm your choice, press the key:
7.
To return the fax machine to its initial stand-by mode,
press the key:
N O T E
With this function enabled, if a power failure occurs and the
date and time are lost, they will be restored when the next call
is received.
T
O
CHANGE
THE
NUMBER
OF
RINGS
This function is only enabled in some countries.
If set in "
AUTOMATIC
",
"
PHONE/FAX
" or "
TAD/FAX
"
reception mode, the fax machine automatically answers
calls after a certain number of rings.
If you want, you can change the number of rings, as
follows:
1.
Press the key
until the display shows:
INSTALLATION
2.
Press the key
until the display shows:
RING COUNT:02
3.
To view the other available values, "01", "03", "04",
"05", "06", "07" and "08", press the keys:
|
/
}
4.
To confirm your choice, press the key:
5.
To return the fax machine to its initial stand-by mode,
press the key:
Summary of Contents for Fax-Lab 115
